0-18V 3.5W Small Portable Mini-hydro Generator Flow Water Charger Hydroelectric

Popular

    Product Introduction

    Features:
    1. Hydroelectric separation technology, clutch coupled with dual magnetic circuits, the volume is only 4/5 of that of ordinary micro hydroelectric generators, but the output power is 2-3 times that of ordinary hydroelectric generators.
    2. Ingenious structural design, the angle of the inlet and outlet pipes can be installed in a straight or L shape according to the requirements.
    3. Reasonable waterway design, low flow loss, low water pressure (0.05Mpa) start, and smooth start when the load is short-circuited.
    4. After being isolated by the diode, it can directly supply rechargeable batteries below 3000MAH or Farad capacitors below 5F for charging and power supply. It is a good partner for smart faucets and induction faucets.
    5. This product has been applied in a large area for many years, and after multiple optimizations, it has a good cost performance.
    Product parameters:
    Product model: F40 (pipeline water flow generator, DC output)
    Operating water pressure: 0.05-0.5Mpa
    Peak operating water pressure: 0.55Mpa
    Peak pressure: 1.6Mpa
    Traffic Loss: 3.6% (at 0.25 MP)
    Operating temperature range: 5℃～85℃
    Output voltage: 9.8~18.5VDC/no load, 8.8~15VDC/0.1 K load
    Output current: 128~260 MA/0.1 K load.
    Dimensions: ￠85.4×42.5×81.4 MM
    Output port during detection: open
    Output power 3.5W
    The angle of the inlet and outlet pipes can be 90 degrees, 180 degrees, 270 degrees, 3 angles
    Installation method: Install in the direction of the arrow, the standard household water pipe is divided into 4 pipes, the outer diameter is 20mm and the inner diameter is 13mm
     
    Package List:
    DC0-18V DC Generator * 1
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    0-18V 3.5W Small Portable Mini-hydro Generator Flow Water Charger Hydroelectric

    Product Introduction

    Features:
    1. Hydroelectric separation technology, clutch coupled with dual magnetic circuits, the volume is only 4/5 of that of ordinary micro hydroelectric generators, but the output power is 2-3 times that of ordinary hydroelectric generators.
    2. Ingenious structural design, the angle of the inlet and outlet pipes can be installed in a straight or L shape according to the requirements.
    3. Reasonable waterway design, low flow loss, low water pressure (0.05Mpa) start, and smooth start when the load is short-circuited.
    4. After being isolated by the diode, it can directly supply rechargeable batteries below 3000MAH or Farad capacitors below 5F for charging and power supply. It is a good partner for smart faucets and induction faucets.
    5. This product has been applied in a large area for many years, and after multiple optimizations, it has a good cost performance.
    Product parameters:
    Product model: F40 (pipeline water flow generator, DC output)
    Operating water pressure: 0.05-0.5Mpa
    Peak operating water pressure: 0.55Mpa
    Peak pressure: 1.6Mpa
    Traffic Loss: 3.6% (at 0.25 MP)
    Operating temperature range: 5℃～85℃
    Output voltage: 9.8~18.5VDC/no load, 8.8~15VDC/0.1 K load
    Output current: 128~260 MA/0.1 K load.
    Dimensions: ￠85.4×42.5×81.4 MM
    Output port during detection: open
    Output power 3.5W
    The angle of the inlet and outlet pipes can be 90 degrees, 180 degrees, 270 degrees, 3 angles
    Installation method: Install in the direction of the arrow, the standard household water pipe is divided into 4 pipes, the outer diameter is 20mm and the inner diameter is 13mm
     
    Package List:
    DC0-18V DC Generator * 1
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    DataCaciques