1 year warranty and 90 days free-of-charge return
Note: Partial refund or free replacement parts if products are damaged or missing parts due to logistics; Return or free replace according to the actual reason if products doesn't work.
Voltage(Frequency):220V±15%(50/60Hz)
Technology:IGBT&Inverter&Digital Display
Thickness:8mm
Width:1mm
Input Current:10A
Current:CUT 50A,WELD 200A
Duty Cycle:60%
Value of Current for Duty Cycle 100%:25A
Compressor Connection:0.4-0.6mpa
Power Factor:0.93
Efficiency Percentage:85%
Surge Protection:YES
Indulation Class:F
Protection Class:IP21
CUT:Plasma air cutting requires an air compressor to be connected. The optimum air pressure value is 0.4-0.6mpa. Different voltages, currents and air pressure values will affect the thickness of the metal that can be cut.
TIG Welding: Argon gas is required, and how many welding methods are available, such as spot welding, continuous welding, etc., depends on different welding machine effects and welding machine habits. There is no requirement for the size of the tungsten needle, 1.6, 2.4, 3.2 and other diameters can be used.
MMA Welding: Does not require any gas, requires welding rod. The easiest way to solder is to use a non-technical and DIY soldering, depending on the welding effect.
|
|
| Package List |
---|