Rust Treatment Converter Brunox Epoxy Rust Stop Primer Protection 30ml brush
Brunox epoxy Rust Converter & primer all in one!
Advantages:
1. perfect penetration
2. Contains no lead, zinc or chromate
3. Unlimited shelf life
Instruction for use:
Remove loose rust and paint blisters. Clean rusted areas. Apply Brunox twice with pencil and leave to dry.
Rust and iron are quickly transformed into a black and stable protective layer which prevents further rusting.
When completely dry Brunox must be covered with paint/body fillers.
Field of application: Wherever rust accumulates in iron and steel - indoors and outdoors. Not suitable for underwater application.
Application temperature: Ideal temperature: room temperature 20 °C, Do not use spray below 10 °C, Brushing / Industrial quality: do not use below 10 °C.
Application environment. Application outdoors: Wait for good, stable weather conditions. Ensure that during application and drying, no
- dew
- rain can set on the BRUNOX® Epoxy layer.
Application indoors: Ensure good ventilation!
Preparing areas affected by rust:
Remove loose rust, grease, dirt and subsurface corroded colour (wire brush, sandpaper, grinding machine, dry ice, water or sand blasting). Derusting must be done according to DIN 55928 part 4, purity grade ST 2 or, if necessary, according to SA 2 1/2. Scale and rust may remain visible only as a slight tint due to shading of pores. Furthermore, the derusted steel must be free of dust and grease. Remove rust dust by blowing it off or with a rag damped with water or acetone.
CAUTION Compressed air can contain oil, which can lead to problems with the adherence!
CAUTION Do not use any solvents, thinners or silicone by any means!