Guitar Skin Axe Wrap Re-skin Vinyl Ashbury Black and White Anaconda Snake 1054
You are getting one sheet symmetrically sized DIY sheet to fit, up to 21" (Max), guitar body wrap vinyl sheet designed to for the front side of your right handed guitar
All of our products are custom printed to order. No refunds -No Returns
Please measure length and width of the body of your guitar before ordering.
LEFTY's GET LEFT OUT NO MORE!!!
LEFTY's GET LEFT OUT NO MORE!!!
Contact us before ordering, most of our skins can be made for lefties. Sticka Steve's has you covered.
14" x 21" size is more than enough for your standard size electric guitar and comfortable for some bass guitars.
14" x 21" size is more than enough for your standard size electric guitar and comfortable for some bass guitars.
If you own a flying V, Explorer or any other custom cool sized guitars and require a specific size, Measure the length and width of the body. Contact us- we can custom print your order to the size you need and adjust pricing as required.
Sticks Steve's has you covered.
If you require to skin the back of your guitar then just add 2 to the quantity when completing your order and will ship them both together.
One 14" X 21" Sheet
Stick them on an axe you desire & play on...
Made with high quality 3M Adhesive Vinyl & laminated with 3 mil high gloss for durability & long lasting protection
Free Shipping & Tracked
All of our products are custom printed to order.
Dimensions listed are rounded to the nearest inch 21"
Application Instructions
1. When you receive your order, your decal will consist of two layers. The bottom layer is the backing paper, and the top layer is the actual vinyl decal.
2. Clean the surface and make sure there is no dust or grease before application.
3. Peel of the decal from the backing paper.
4. Position and stick the application film on the target surface. Rub the surface of application film with a credit card or dried towel to make sure there's no air bubble caught inside the vinyl decal.
5. Peel off the application film slowly and carefully at a very low angle. (*Note you will require a razor blade, exacto knife for control / humbucker cavity cut out. See pictures for example.
Make sure the vinyl decal stick on the surface. If there is any difficulties removing the application film, please leave the film on the surface longer.
All of our Guitar Skins are Free Shipping & Tracked in the U.S.A.
( Be sure to check out our guitar wall skins & other cool listings )
If you require to skin the back of your guitar then just add 2 to the quantity when completing your order and will ship them both together.
One 14" X 21" Sheet
Stick them on an axe you desire & play on...
Made with high quality 3M Adhesive Vinyl & laminated with 3 mil high gloss for durability & long lasting protection
Free Shipping & Tracked
All of our products are custom printed to order.
Dimensions listed are rounded to the nearest inch 21"
Application Instructions
1. When you receive your order, your decal will consist of two layers. The bottom layer is the backing paper, and the top layer is the actual vinyl decal.
2. Clean the surface and make sure there is no dust or grease before application.
3. Peel of the decal from the backing paper.
4. Position and stick the application film on the target surface. Rub the surface of application film with a credit card or dried towel to make sure there's no air bubble caught inside the vinyl decal.
5. Peel off the application film slowly and carefully at a very low angle. (*Note you will require a razor blade, exacto knife for control / humbucker cavity cut out. See pictures for example.
Make sure the vinyl decal stick on the surface. If there is any difficulties removing the application film, please leave the film on the surface longer.
All of our Guitar Skins are Free Shipping & Tracked in the U.S.A.
( Be sure to check out our guitar wall skins & other cool listings )
Sticka Steve's Guitar Skins and Application
Video will open in a new window
Using the mobile app? Copy this link into your browser: