specification:
Manufacturer Part Number: 56070
Applicable models: easy to connect 5 -speed wheels or Gooseneck cables. (Such as trailer brake light/taillights/reverse lights/steering signal lights/auxiliary power cords ...)
The response speed is faster, the cost is lower, and the installation is more convenient.
The extension of the existing trailer of the truck.
Keep the original 7 -way RV socket, and add an additional 7 -way socket to the truck base.
The socket can be fixed at any position on the truck base, and then inserted the extended line into the existing factory wiring.
The socket is equipped with a spring dust cover to keep the connector clean.
Working voltage: 6-24 volts
Material: Made of metal and PP.
Color: as shown in the figure.
Part Number: 56070
for Ford F-150 from 1997 to 2014.
for Ford F-150 Heritage.
for Ford F-250 from 1997 to 1999.
for Ford F-250 HD from 1997 to 1997.
for the Ford F-250 Super Duty from 1999 to 2016.
for Ford F-350 Super Duty from 1999-2021.
for Ford F-350 Super Duty from 1999 to 2016.
for Ford F-450 Super Duty from 1999-2021.
For Ford F-450 Super Duty from 2008-2016.
for Ford F-550 Super Duty from 1999-2021.
for 2009-2010 Dawu RAM 1500.
for 2010-2010 Daqi RAM 2500.
for 2010-2010 Daqi RAM 3500.
for 2011-2021ram 1500.
for 2011-2021ram 2500.
for 2011-2021 RAM 3500.
for Silverado 1500 from 1999-2019.
for Silverado 2500 from 1999-2019.
for Chevrolet Silverado 3500 from 2001 to 2019.
for GMC Sierra 1500 from 1999 to 2019.
for GMC Sierra 2500 from 1999 to 2019.
for GMC Sierra 3500 from 2001 to 2019.
for Nissan Titan from 2004 to 2021.
for Nissan XD from 2016-2020.
Applicable to Toyota models:
for Toyota TUNDRA in 2010-2021.
Vehicle compatibility charts are for reference only. Check the product type and size to meet your needs.
installation steps:
1. Find the existing trailer beam installed on the hanging device or the rear bumper.
2. Press and remove the white clip holder's ears, and separate the 7 -way connector from the car line.
3. Place the paired extension lines between the separate connectors. The longer one of the pairing joints is inserted into the car beam connector. Insert a shorter part of the connected joint into the rear of the factory 7 socket. Make sure that the joints are inserted completely, and the lock tongue is in place.
4. Find a path to the back of the bottom of the car. Select a 2-1/8-inch hole in the installation position.
5. Use the provided self -attack screws to fix the connector on the side wall.
Note:
Please check whether the picture is matched before buying.
It is not included in the installation guide, we strongly recommend seeking professional installation. Any damage in the installation process will not be refunded.
Because the computer screen is different, the color of the actual items may be slightly different from the image in the list. Thank you for your understanding.