Features:
Brand new and Unuse
Material: light weight aluminum.
Whistle Length: 102mm
Whistle Diameter: 19mm
Color: Silver
Make your vehicle sound like a turbo vehicle with the turbo system or blow off valve
Aluminium body, very strong and light.
Easy-fitting on the vehicle's muffler,it reproduces the sound of a turbo engine car.
Quantity : 1 piece
Installation:
Option 1: (Recommended)Double fitting ( 2 bolts ),suitable for almost the whole range of mufflers.
Remove bolt 1 from the stand.
Place turbo-sound on the bottom of the pipe (fig.1) and fix it temporarilly by using bolt 2.
Mark the place for the hole of bolt 1 with a punch, then remove turbo-sound.
Drill a Φ6.5mm hole in the point previously marked..
Place turbo-sound inside the pipe,and screw bolt 1(fig.2).
Make sure that the rock nut is secured.
Tighten first bolt2,then the rock nut (fig.2) to prevent loosening due to vibrations.
Option 2: Basic fiting (with just 1 bolt), only for inner bevel mufflers.
Remove bolt 1 from the stand.
Place the whistler inside the pipe (fig.2) and fix it by screwing the bolt 2.
Notice:
Turbo-sound is not suitable for extremely cured pipes.if curvature is minor,the fitting bracket may be slightly curved to match teh tail pipe.
Not suitable for pipes having smaller or bigger diameter than the ones spedified on front.
For tail pipes with deflected oulet,it might be necessary to modify slightly the shape to allow installation.
rior to the purchase and installation, make sure that the interior of the tailpipe is suitable and sufficiently long ( 11-12cm ) to contain the Turbo-Sound device.
Periodcally (after 500-1000km) check and re-tighten the bolt and rock nut.
The manufacturer disclaims any consequent damage from misuse,modification or improper use.
For race use only,not approved for use on public roads.