5 liters of ready-to-spray base coat suitable for Ford 571 Panther Black Metallic car paint

5 liters of ready-to-spray diluted base coat in the same color

suitable for Ford 571 Panther Black Mica Metallic

This base coat must be painted over with a 2K clear coat

The base coat is easy to apply, it dries quickly and has an elegant appearance in the end.

With every paint order you get:

1 pair of painting gloves

1 mixing cup

1 paint sieve


No water base coat!


VOC regulation

Please note the VOC regulations

From the 01. January 2007 the changes from the so-called "VOC regulation" (2004/42/EC or 1999/13/EC) take effect.

For us as a dealer, this means that we have to ensure that products that are not VOC-compliant, such as industrial paints, are only used for painting in the exceptional cases mentioned below.

These applications are:

-       Restoration of classic cars

-       Filling aerosol spray cans

-       Painting of vehicles of the Bundeswehr, civil defense, fire brigade, as well as the forces responsible for maintaining order

-       Painting of vehicles used in public service exclusively in urban areas

-       Industrial painting (e.g. plastic parts not related to vehicles).

With the purchase you confirm that you are familiar with the legal situation of the ChemVOCFarbV and have been sufficiently informed about it by us - Lackpoint Dresden.

You also confirm that you will only use the products that you purchase from us that do not comply with the VOC limit values ​​for the exceptional cases mentioned above.

The responsibility for the intended sale is hereby transferred from Lackpoint Dresden as the seller to you as the buyer.

 

processing

Processing temperature at least 20°C.

Sand the surface to be painted with grit P500 to P800 and then degrease well (silicone remover).

When working on new or unpainted plastic surfaces, apply a plastic primer and note the drying time.

Then apply the filler or a primer

We recommend an epoxy primer (e.g. item number 162527166545)

Sand the surface well with the appropriate grit (P500-P800). smooth.

Then clean with silicone remover; the surface must be free of dust (recommended dust cloth) and grease.

Apply the base coat in 2-3 spray coats, depending on the opacity of the paint. Between coats approx. Allow to flash for 5-10 minutes.

After 20-30 minutes flash-off time (max. 24 hours) the base coat must be painted over with a 2-component clear coat.

 


For us as a dealer, this means that we have to ensure that products that are not VOC-compliant, such as industrial paints, are only used for painting in the exceptional cases mentioned below. -       Painting of vehicles of the Bundeswehr, civil defense, fire brigade, as well as the forces responsible for maintaining order With the purchase you confirm that you are familiar with the legal situation of the ChemVOCFarbV and have been sufficiently informed about it by us - Lackpoint Dresden. You also confirm that you will only use the products that you purchase from us that do not comply with the VOC limit values ​​for the exceptional cases mentioned above. The responsibility for the intended sale is hereby transferred from Lackpoint Dresden as the seller to you as the buyer. Apply the base