eBay

High Temperature Rotary Viscosity Meter Viscometer for Hot Melt

Polyethylene Wax

Introduction:

The viscometer is mainly applied to test the viscosity of asphalt, hot melt adhesive, a polyethylene wax,and etc, which is solid at room temperature, but become liquid substances when is heated at a high temperature.
Can be used alone, the measurement data directly displayed on the LCD screen, without secondary computing; The optional purchased "data acquisition and analysis and mapping software" is for data collection and data analysis, process monitoring viscosity - temperature curve.
High subdivision stepper motor, speed accurate and stable.
LCD display with blue backlight, direct display viscosity, speed, torque percentage terms, chosen spindle number, maximum viscosity value and temperature value in the current rotational speed of the spindle. DV-2 series can also display shear rate and shear stress. Viscosity data shows a continuous change, it will alarm when the measurement beyond the measuring range.
High temperature furnace using the Embedded overall heating, heat evenly, small thermal inertia.

Specification:

Model	---
Standard spindle	Spindles 21, 27, 28, 29
Measuring Range(mPa·s)	50~200K
Speed Range (r.p.m.)	5, 10, 20, 50, 100
Measuring method	Manual
Accuracy	±1%(FS) Newton liquid
Return Capacity	±0.5% (relative error)
Sample capacity(ml)	10 ~ 20
Temperature Range(℃)	Room temperature +10 ~ 250
Temperature accuracy(℃)	±0.1
Power	220V 50Hz If your voltage is 110V, you need to buy a voltage converter.
Display Function	LCD screen can display viscosity, speed, temperature, percent torque meter rotor and a selected number of rotor speeds can be measured in the current maximum viscosity value, etc. Temperature controller: display the set temperature and the actual measured temperature

Stand Accessories:

Optional accessories: