Vespa Flywheel Side Bearing Px Lml Pk Cosa Original Fitment By Piaggio

Vespa Flywheel Side Bearing Px Lml Pk Cosa Original Fitment By Piaggio

The PX flywheel side bearings are originally produced by NADELLA.

Top of the range and our recommendation:
Bearing Crankshaft flywheel
side
for Vespa PK125 S 2°/ETS/N/XL
/XL2/125 GTR 2°/TS 2°/150
Sprint V 2°/Super 2°/200
Rally 2°/PX80-200/PE/Lusso
/Cosa,
NADELLA, 25x38x15 mm,
23 needles

Various types of roller bearings are used in the Vespa's engine: Thrust bearings, Tapered roller bearings and needle roller bearings. We refer to them collectively as engine bearings. They all possess minimal friction values and therefore produce little heat, require less lubrication and are virtually maintenance-free. The only thing that can shorten their life-span are contamination, a heavier than average work-load or a lack of adequate lubrication with a suitable oil. The stronger the state of tune or the higher the mileage a motor has achieved, the more frequently the engine bearings require replacement. We recommend engine bearing renewal during every major engine service or 10000 km (6250 mls.)

Most of the engine bearings we have available are original PIAGGIO items and in order to extend the range , we also have most types of bearings available, that we buy directly by the various manufacturers.

GINGERTONY-TIP : Do not forget to order new crankshaft oil seals and gasket set when replacing the bearings of your Vespa's engine. For a quicker and more professional job there are also specialist tools available specifically for this purpose.

If your flywheel can be moved up and down while completely installed it's time, at least, to replace the flywheel side crankshaft bearing. A new crankshaft should never be used in combination with the used, existing bearings.

Riders of the Vespa 160 GS/180 SS/180/200 Rally 1° models can sleep easier in the knowledge that the crankshaft bearing originating in the Vespa T5, also fits their scooter, so helping prevent engine breakdowns due to bearing failure! the reinforced SIP flywheel side bearing, high quality, 24 needle pin, one-piece cage.

OEM Numbers (for the purpose of comparison) 133524 - 133068 (PIAGGIO), 133068 (LML)

 

Shipping

Shipping cost:
All our items on ebay include basic free postage

Upgrading the postage £10.00 the items will be sent Royal Mail special delivery

or UPS which is usually next day if sent early enough

Delivery time

small items are posted royal mail 48 or tracked 48 usually 2-3 days delivery

more expensive items are posted using UPS which are 1-2 days delivery

Larger items such as floor runners and legshield trims are posted by EVRI 2-3 days

 

Payment

We accept the following payment methods:

  • Paypal
  • call for other options

Please contact us if you have any questions. Tony 07810011361, 07868296364

Service