Permanent magnet damper for winding machine, tension controller, brake MTB-08
■ Product name:
Magnetic Damper MTB-08
Product description: Magnetic damper, also known as tension adjuster, is a device that adjusts the torque by adjusting the magnetic field. The alloy sheet has no contact with the magnetic ring, so the life is long and the tension is stable. Magnetic dampers are used in wire and cable, optical fiber and cable industries, and can be used in mechanical shrinkage tension controllers such as wire harnessing machines, wire drawing machines, and winding machines, and have the effect of stable tension control. The magnetic damper structure is mature in design, easy to install and adjust
■ Product application:
When you produce products based on enameled wire, you will definitely encounter broken wires, loose wires and other problems, as well as other problems caused by them. The magnetic tensioner produced by our company will be a good helper for you to solve these problems.
Scope of product application: Widely used in occasions where constant and lasting tension control is required for winding operations from metal materials to fiber materials (enameled wire, fishing line, metal wire, belt core, etc.)
■ Product Features:
1. The elements of the tension system are highly integrated, and the configuration is optimized, which is easy to install and adjust.
2. The permanent magnetic tension controller is used to keep the tension constant and conform to the development direction of the industry's most advanced tension control.
3. The transmission wheel and guide wheel are made of special ceramics and special wear-resistant rubber wheel, which can effectively avoid the damage to the paint film or fiber by the wire mechanism during the winding operation.
■ Product manual:
As shown in the figure above, please ensure that:
Notes when installing:
One: Adjustment matters:
1: Please turn the tension scale to 9 before setting the tension, turn the shaft of the rubber wheel at the same time, and slowly turn the tension adjustment ring to 0, otherwise it will be easy to produce K characteristics and the tension will fluctuate
2. Security:
1. Please regularly check whether there is sweat, cracks or damage where the enameled wire passes. If there is, please clean it with alcohol, and then apply lubricating oil;
2. Please check regularly whether there is any unevenness in the V-groove of the damping disc, and replace it if there is.
5. Supplementary instructions: Since the tensioner is a combination of precision parts, please do not disassemble it casually.
■ Recommendations for product use:
1. The damper uses a magnet to generate a medium magnetic field, and the material is brittle, so do not disassemble it during use to avoid damage to the parts.
2. If tension pulsation occurs during use, please repeat the steps of adjustment method 3 above until a satisfactory tension is obtained.
To the desired scale value, tighten the locking screw.
3. Loosen the fastening screw, turn the scale to 10, slowly turn the scale to 0 while rolling the spindle, and then turn to
4. If it is used below the scale value of 4, force pulsation may occur. Please eliminate the pulsation as described in item 3 below.
5. It is recommended that the customer adjust the scale value to above 4. If the tension is too large at this time, it is best to use a damper with a smaller size.
■ Product specification diagram:
1. Packing:1pcs
2. Warranty period: 120 days
Permanent magnet damper for winding machine, tension controller, brake MTB-08
■ Product name:
Magnetic Damper MTB-08
Product description: Magnetic damper, also known as tension adjuster, is a device that adjusts the torque by adjusting the magnetic field. The alloy sheet has no contact with the magnetic ring, so the life is long and the tension is stable. Magnetic dampers are used in wire and cable, optical fiber and cable industries, and can be used in mechanical shrinkage tension controllers such as wire harnessing machines, wire drawing machines, and winding machines, and have the effect of stable tension control. The magnetic damper structure is mature in design, easy to install and adjust
■ Product application:
When you produce products based on enameled wire, you will definitely encounter broken wires, loose wires and other problems, as well as other problems caused by them. The magnetic tensioner produced by our company will be a good helper for you to solve these problems.
Scope of product application: Widely used in occasions where constant and lasting tension control is required for winding operations from metal materials to fiber materials (enameled wire, fishing line, metal wire, belt core, etc.)
■ Product Features:
1. The elements of the tension system are highly integrated, and the configuration is optimized, which is easy to install and adjust.
2. The permanent magnetic tension controller is used to keep the tension constant and conform to the development direction of the industry's most advanced tension control.
3. The transmission wheel and guide wheel are made of special ceramics and special wear-resistant rubber wheel, which can effectively avoid the damage to the paint film or fiber by the wire mechanism during the winding operation.
■ Product manual:
As shown in the figure above, please ensure that:
Notes when installing:
One: Adjustment matters:
1: Please turn the tension scale to 9 before setting the tension, turn the shaft of the rubber wheel at the same time, and slowly turn the tension adjustment ring to 0, otherwise it will be easy to produce K characteristics and the tension will fluctuate
2. Security:
1. Please regularly check whether there is sweat, cracks or damage where the enameled wire passes. If there is, please clean it with alcohol, and then apply lubricating oil;
2. Please check regularly whether there is any unevenness in the V-groove of the damping disc, and replace it if there is.
5. Supplementary instructions: Since the tensioner is a combination of precision parts, please do not disassemble it casually.
■ Recommendations for product use:
1. The damper uses a magnet to generate a medium magnetic field, and the material is brittle, so do not disassemble it during use to avoid damage to the parts.
2. If tension pulsation occurs during use, please repeat the steps of adjustment method 3 above until a satisfactory tension is obtained.
To the desired scale value, tighten the locking screw.
3. Loosen the fastening screw, turn the scale to 10, slowly turn the scale to 0 while rolling the spindle, and then turn to
4. If it is used below the scale value of 4, force pulsation may occur. Please eliminate the pulsation as described in item 3 below.
5. It is recommended that the customer adjust the scale value to above 4. If the tension is too large at this time, it is best to use a damper with a smaller size.
■ Product specification diagram:
1. Packing:1pcs
2. Warranty period: 120 days
Permanent magnet damper for winding machine, tension controller, brake MTB-08
■ Product name:
Magnetic Damper MTB-08
Product description: Magnetic damper, also known as tension adjuster, is a device that adjusts the torque by adjusting the magnetic field. The alloy sheet has no contact with the magnetic ring, so the life is long and the tension is stable. Magnetic dampers are used in wire and cable, optical fiber and cable industries, and can be used in mechanical shrinkage tension controllers such as wire harnessing machines, wire drawing machines, and winding machines, and have the effect of stable tension control. The magnetic damper structure is mature in design, easy to install and adjust
■ Product application:
When you produce products based on enameled wire, you will definitely encounter broken wires, loose wires and other problems, as well as other problems caused by them. The magnetic tensioner produced by our company will be a good helper for you to solve these problems.
Scope of product application: Widely used in occasions where constant and lasting tension control is required for winding operations from metal materials to fiber materials (enameled wire, fishing line, metal wire, belt core, etc.)
■ Product Features:
1. The elements of the tension system are highly integrated, and the configuration is optimized, which is easy to install and adjust.
2. The permanent magnetic tension controller is used to keep the tension constant and conform to the development direction of the industry's most advanced tension control.
3. The transmission wheel and guide wheel are made of special ceramics and special wear-resistant rubber wheel, which can effectively avoid the damage to the paint film or fiber by the wire mechanism during the winding operation.
■ Product manual:
As shown in the figure above, please ensure that:
Notes when installing:
One: Adjustment matters:
1: Please turn the tension scale to 9 before setting the tension, turn the shaft of the rubber wheel at the same time, and slowly turn the tension adjustment ring to 0, otherwise it will be easy to produce K characteristics and the tension will fluctuate
2. Security:
1. Please regularly check whether there is sweat, cracks or damage where the enameled wire passes. If there is, please clean it with alcohol, and then apply lubricating oil;
2. Please check regularly whether there is any unevenness in the V-groove of the damping disc, and replace it if there is.
5. Supplementary instructions: Since the tensioner is a combination of precision parts, please do not disassemble it casually.
■ Recommendations for product use:
1. The damper uses a magnet to generate a medium magnetic field, and the material is brittle, so do not disassemble it during use to avoid damage to the parts.
2. If tension pulsation occurs during use, please repeat the steps of adjustment method 3 above until a satisfactory tension is obtained.
To the desired scale value, tighten the locking screw.
3. Loosen the fastening screw, turn the scale to 10, slowly turn the scale to 0 while rolling the spindle, and then turn to
4. If it is used below the scale value of 4, force pulsation may occur. Please eliminate the pulsation as described in item 3 below.
5. It is recommended that the customer adjust the scale value to above 4. If the tension is too large at this time, it is best to use a damper with a smaller size.
■ Product specification diagram:
1. Packing:1pcs
2. Warranty period: 120 days
Permanent magnet damper for winding machine, tension controller, brake MTB-08
■ Product name:
Magnetic Damper MTB-08
Product description: Magnetic damper, also known as tension adjuster, is a device that adjusts the torque by adjusting the magnetic field. The alloy sheet has no contact with the magnetic ring, so the life is long and the tension is stable. Magnetic dampers are used in wire and cable, optical fiber and cable industries, and can be used in mechanical shrinkage tension controllers such as wire harnessing machines, wire drawing machines, and winding machines, and have the effect of stable tension control. The magnetic damper structure is mature in design, easy to install and adjust
■ Product application:
When you produce products based on enameled wire, you will definitely encounter broken wires, loose wires and other problems, as well as other problems caused by them. The magnetic tensioner produced by our company will be a good helper for you to solve these problems.
Scope of product application: Widely used in occasions where constant and lasting tension control is required for winding operations from metal materials to fiber materials (enameled wire, fishing line, metal wire, belt core, etc.)
■ Product Features:
1. The elements of the tension system are highly integrated, and the configuration is optimized, which is easy to install and adjust.
2. The permanent magnetic tension controller is used to keep the tension constant and conform to the development direction of the industry's most advanced tension control.
3. The transmission wheel and guide wheel are made of special ceramics and special wear-resistant rubber wheel, which can effectively avoid the damage to the paint film or fiber by the wire mechanism during the winding operation.
■ Product manual:
As shown in the figure above, please ensure that:
Notes when installing:
One: Adjustment matters:
1: Please turn the tension scale to 9 before setting the tension, turn the shaft of the rubber wheel at the same time, and slowly turn the tension adjustment ring to 0, otherwise it will be easy to produce K characteristics and the tension will fluctuate
2. Security:
1. Please regularly check whether there is sweat, cracks or damage where the enameled wire passes. If there is, please clean it with alcohol, and then apply lubricating oil;
2. Please check regularly whether there is any unevenness in the V-groove of the damping disc, and replace it if there is.
5. Supplementary instructions: Since the tensioner is a combination of precision parts, please do not disassemble it casually.
■ Recommendations for product use:
1. The damper uses a magnet to generate a medium magnetic field, and the material is brittle, so do not disassemble it during use to avoid damage to the parts.
2. If tension pulsation occurs during use, please repeat the steps of adjustment method 3 above until a satisfactory tension is obtained.
To the desired scale value, tighten the locking screw.
3. Loosen the fastening screw, turn the scale to 10, slowly turn the scale to 0 while rolling the spindle, and then turn to
4. If it is used below the scale value of 4, force pulsation may occur. Please eliminate the pulsation as described in item 3 below.
5. It is recommended that the customer adjust the scale value to above 4. If the tension is too large at this time, it is best to use a damper with a smaller size.
■ Product specification diagram:
Permanent magnet damper for winding machine, tension controller, brake MTB-08
■ Product name:
Magnetic Damper MTB-08
Product description: Magnetic damper, also known as tension adjuster, is a device that adjusts the torque by adjusting the magnetic field. The alloy sheet has no contact with the magnetic ring, so the life is long and the tension is stable. Magnetic dampers are used in wire and cable, optical fiber and cable industries, and can be used in mechanical shrinkage tension controllers such as wire harnessing machines, wire drawing machines, and winding machines, and have the effect of stable tension control. The magnetic damper structure is mature in design, easy to install and adjust
■ Product application:
When you produce products based on enameled wire, you will definitely encounter broken wires, loose wires and other problems, as well as other problems caused by them. The magnetic tensioner produced by our company will be a good helper for you to solve these problems.
Scope of product application: Widely used in occasions where constant and lasting tension control is required for winding operations from metal materials to fiber materials (enameled wire, fishing line, metal wire, belt core, etc.)
■ Product Features:
1. The elements of the tension system are highly integrated, and the configuration is optimized, which is easy to install and adjust.
2. The permanent magnetic tension controller is used to keep the tension constant and conform to the development direction of the industry's most advanced tension control.
3. The transmission wheel and guide wheel are made of special ceramics and special wear-resistant rubber wheel, which can effectively avoid the damage to the paint film or fiber by the wire mechanism during the winding operation.
■ Product manual:
As shown in the figure above, please ensure that:
Notes when installing:
One: Adjustment matters:
1: Please turn the tension scale to 9 before setting the tension, turn the shaft of the rubber wheel at the same time, and slowly turn the tension adjustment ring to 0, otherwise it will be easy to produce K characteristics and the tension will fluctuate
2. Security:
1. Please regularly check whether there is sweat, cracks or damage where the enameled wire passes. If there is, please clean it with alcohol, and then apply lubricating oil;
2. Please check regularly whether there is any unevenness in the V-groove of the damping disc, and replace it if there is.
5. Supplementary instructions: Since the tensioner is a combination of precision parts, please do not disassemble it casually.
■ Recommendations for product use:
1. The damper uses a magnet to generate a medium magnetic field, and the material is brittle, so do not disassemble it during use to avoid damage to the parts.
2. If tension pulsation occurs during use, please repeat the steps of adjustment method 3 above until a satisfactory tension is obtained.
To the desired scale value, tighten the locking screw.
3. Loosen the fastening screw, turn the scale to 10, slowly turn the scale to 0 while rolling the spindle, and then turn to
4. If it is used below the scale value of 4, force pulsation may occur. Please eliminate the pulsation as described in item 3 below.
5. It is recommended that the customer adjust the scale value to above 4. If the tension is too large at this time, it is best to use a damper with a smaller size.
■ Product specification diagram:
2. If tension pulsation occurs during use, please repeat the steps of adjustment method 3 above until a satisfactory tension is obtained.
To the desired scale value, tighten the locking screw.
3. Loosen the fastening screw, turn the scale to 10, slowly turn the scale to 0 while rolling the spindle, and then turn to
4. If it is used below the scale value of 4, force pulsation may occur. Please eliminate the pulsation as described in item 3 below.
5. It is recommended that the customer adjust the scale value to above 4. If the tension is too large at this time, it is best to use a damper with a smaller size.
■ Product specification diagram:
1. Packing:1pcs
2. Warranty period: 120 days
1. Packing:1pcs
2. Warranty period: 120 days
On Aug 2, 2022 at 01:40:40 PDT, seller added the following information:
