This is a great set of easy-reassembling LCD controller which is used to turn a bare LCD panel into a desktop/PC monitor. (Plug&play, no need soldering)
This kit is suitable for 1920x1080 resolution EDP 30-Pin signal port 60Hz screen
Compatible with the following screen model:
NT156WHM-N34
N156HHE-GA1
N140BGE
LP156WF6
B125HAN02.0
B125HAN02.2
B125HAN02.3
B156XTN07.0
etc ........
Come In Standby Mode When Not Input Signal
Input Power Adapter: DC 12V/3A-5A (need to buy extra)
(Screen size exceeds 17 inch, 5A power is recommended)
Video Input: HDMI or VGA
Audio Input: HDMI or VGA
Audio Output: Small speaker (need to buy extra)
Default language: English
Package List:
1Pcs x EDP controller board
Special Note: Except for the EDP motherboard. You need to prepare EPD cable, key board, power adapter and HDMI or VGA cable by yourself (some screens need to prepare inverter). For these accessories, you can contact us. Our store may have all accessories compatible with your screen, thank you
Installation Steps:
1. Take away the old screen cable from the LCD panel.
2. Connect the new screen cable to your LCD panel. (Note the connector contact direction)
3. Connect the controller board to the PC with VGA signal cable.
4. Input power. (Please use the standard LCD screen power supply, other power input may not boot normally)
5. After all finishing the connecting, please do not rush to power on! No metal contact is allowed when powering on the controller board, otherwise short circuit may occur, which may cause unavailability of the controller board.