Domestic Orders under $13.50 (before tax) are sent with stamp postage unless upgraded shipping is requested.

International Orders are sent with an International Stamp unless upgraded shipping is requested.

★Design
✔ Smiley Face Daisy ~original artwork!~

★Size
✔3.5 inches or 5.0 inches

★Appropriate Surfaces for Application
✔ Clean, very dry, untextured, non-silicone/rubber-coated (decals won't last as long on and are difficult to apply to such surfaces)
✔ Cars, laptops, windows, tumblers, journals, etc.

~~~ABOUT SPECIAL COLORS~~~
≫Opal colors are glossy and color shifting
≫Metallic colors are usually matte and slightly reflect light
≫Chrome colors are glossy and have a mirror effect

★How to apply
❶ Run a straight edge over the front and back of the decal and clean your desired surface (let it dry completely!)

❷ Either peel the decal face down and place it on your surface OR place a small corner of the transfer tape on your surface and slowly push the decal down using a straight edge (this is the best way to avoid bubbles but can be trickier!)

❸ Let the decal sit for at least 1 hour before removing the transfer tape (not in direct sunlight!)

~~~~~~~~~~~~~~~~~~~

Thank you for looking into this listing. Please feel free to message me with any questions. I create the designs myself and have been making decals since 2017.

If you place an order and are unsatisfied, please reach out! I never understand when people leave a 3-star or review or lower for reading my descriptions wrong or having issues without even contacting me for help. - trust me, I'm friendly, and I currently have thousands of sales and years of customer service across various platforms under my belt. Don't be afraid to talk to me!

Thank you again,
Melissa

❤FREQUENTLY ASKED QUESTIONS❤
~~~~~~~~~~~~~~~~~~~
1. Do I leave the layer of tape on my decal?

--->No! Please remove it after at least an hour, preferably 8-12 hours out of direct sunlight. The tape is not there for any other purpose than to apply the decal, you don't need to leave it on.

2. How do I avoid application mistakes?

--->My first piece of advice is to watch a video or two about applying vinyl decals. There is an awesome trick where you can use clear parchment paper to help you accurately place the decal! You just place the transfer tape and decal on t some parchment paper and mess around with placement on your surface before removing the parchment. In general, I don't recommend full peeling a decal off the backing because it can cause air bubbles if you don't press the decal down with enough force, so I usually peel a corner of the tape up and then push the decal down onto my surface, but this is really tricky for some people.

3. How do I remove a permanent vinyl decal?

-->It depends on how long you've had the decal on your surface. First of all, when you are applying a new decal, don't press it down until you're sure of how you're putting it on. Second of all, permanent vinyl decals stick super well to glass, so it can take some effort to remove one if it's been sitting for a while. I personally change the decals on my laptop rather often, and I haven't had any issues peeling them off with my hand.
-->Here are my general tips: heat up the decal with a hairdryer, use a string of floss or something similar and wiggle it under the decal after you peel up a little corner with a fingernail, and remove residue by letting the sticky stuff soak in olive or coconut oil then wash it off with soapy water.

4. I messed up super bad, what do I do?

--->Message me with a picture of your mistake so I can send a new one! I require a picture because I don't want people taking advantage of me :)