Description
2pcs XHQ-PT Diesel Generator Engine Stop Solenoid Valve Flameout Device DC 12V Power Off Pulling Type
Version Introduction:
Normally Closed Type: The flameout device will act when control line is powered off, and will stop automatically when the action is in place. The flameout device is released after the control line is energized. That is, pull tight after power off, release after power on.
Used for shutdown control of diesel engines, suitable for different types of diesel engines.
Specifications:
- Rated voltage DC 12V or DC 24V
- Working current: ≤0.5A
- Action time: ≤1.5S
- Rally: ≥150N
- Working stroke: 45mm±5mm/1.8"±0.2"
- Ambient temperature: -40℃ to 105℃/-104℉ to 221℉
- Service life: ≥ 50,000 cycles
- Wiredrawing length: 100cm/39.4" (specific length can be customized according to needs)
Advantages:
1. Small Working Current: When pulling 150N, the flameout current is ≤0.5A, and the stroke length is about 50MM/2" (the pulling force of ordinary similar products is 100N, and stroke is about 40MM/1.6").
2. Leading Technology: The working time to cut fuel supply to stop is ≤1.5 seconds, and the machine will stop automatically when the work is in place; the internal relay is controlled by the travel switch.
3. Long Service Life: It can work for more than 50,000 cycles under normal use.
4. Small Size & Easy Installation: It can be directly installed on fuel injection pump, or it can be equipped with a flexible shaft and steel wire rope assembly, and choose an appropriate location for installation.
5. Sophisticated Material: The shell material boasts high strength, high hardness, flame retardant and antifreeze, impact resistance, aging resistance, etc.
6. Low Price: The price is much lower than that of shut-off solenoid valve used in large quantities on the market, which can reduce the production cost.
Package Included:
- 2 x Engine Stop Solenoids
Version Introduction:
Normally Closed Type: The flameout device will act when control line is powered off, and will stop automatically when the action is in place. The flameout device is released after the control line is energized. That is, pull tight after power off, release after power on.
Used for shutdown control of diesel engines, suitable for different types of diesel engines.
Specifications:
- Rated voltage DC 12V or DC 24V
- Working current: ≤0.5A
- Action time: ≤1.5S
- Rally: ≥150N
- Working stroke: 45mm±5mm/1.8"±0.2"
- Ambient temperature: -40℃ to 105℃/-104℉ to 221℉
- Service life: ≥ 50,000 cycles
- Wiredrawing length: 100cm/39.4" (specific length can be customized according to needs)
Advantages:
1. Small Working Current: When pulling 150N, the flameout current is ≤0.5A, and the stroke length is about 50MM/2" (the pulling force of ordinary similar products is 100N, and stroke is about 40MM/1.6").
2. Leading Technology: The working time to cut fuel supply to stop is ≤1.5 seconds, and the machine will stop automatically when the work is in place; the internal relay is controlled by the travel switch.
3. Long Service Life: It can work for more than 50,000 cycles under normal use.
4. Small Size & Easy Installation: It can be directly installed on fuel injection pump, or it can be equipped with a flexible shaft and steel wire rope assembly, and choose an appropriate location for installation.
5. Sophisticated Material: The shell material boasts high strength, high hardness, flame retardant and antifreeze, impact resistance, aging resistance, etc.
6. Low Price: The price is much lower than that of shut-off solenoid valve used in large quantities on the market, which can reduce the production cost.
Package Included:
- 2 x Engine Stop Solenoids
2pcs XHQ-PT Diesel Generator Engine Stop Solenoid Valve Flameout Device DC 24V Power Off Pulling Type
Version Introduction:
Normally Closed Type: The flameout device will act when control line is powered off, and will stop automatically when the action is in place. The flameout device is released after the control line is energized. That is, pull tight after power off, release after power on.
Used for shutdown control of diesel engines, suitable for different types of diesel engines.
Specifications:
- Rated voltage DC 12V or DC 24V
- Working current: ≤0.5A
- Action time: ≤1.5S
- Rally: ≥150N
- Working stroke: 45mm±5mm/1.8"±0.2"
- Ambient temperature: -40℃ to 105℃/-104℉ to 221℉
- Service life: ≥ 50,000 cycles
- Wiredrawing length: 100cm/39.4" (specific length can be customized according to needs)
Advantages:
1. Small Working Current: When pulling 150N, the flameout current is ≤0.5A, and the stroke length is about 50MM/2" (the pulling force of ordinary similar products is 100N, and stroke is about 40MM/1.6").
2. Leading Technology: The working time to cut fuel supply to stop is ≤1.5 seconds, and the machine will stop automatically when the work is in place; the internal relay is controlled by the travel switch.
3. Long Service Life: It can work for more than 50,000 cycles under normal use.
4. Small Size & Easy Installation: It can be directly installed on fuel injection pump, or it can be equipped with a flexible shaft and steel wire rope assembly, and choose an appropriate location for installation.
5. Sophisticated Material: The shell material boasts high strength, high hardness, flame retardant and antifreeze, impact resistance, aging resistance, etc.
6. Low Price: The price is much lower than that of shut-off solenoid valve used in large quantities on the market, which can reduce the production cost.
Package Included:
- 2 x Engine Stop Solenoids
Version Introduction:
Normally Closed Type: The flameout device will act when control line is powered off, and will stop automatically when the action is in place. The flameout device is released after the control line is energized. That is, pull tight after power off, release after power on.
Used for shutdown control of diesel engines, suitable for different types of diesel engines.
Specifications:
- Rated voltage DC 12V or DC 24V
- Working current: ≤0.5A
- Action time: ≤1.5S
- Rally: ≥150N
- Working stroke: 45mm±5mm/1.8"±0.2"
- Ambient temperature: -40℃ to 105℃/-104℉ to 221℉
- Service life: ≥ 50,000 cycles
- Wiredrawing length: 100cm/39.4" (specific length can be customized according to needs)
Advantages:
1. Small Working Current: When pulling 150N, the flameout current is ≤0.5A, and the stroke length is about 50MM/2" (the pulling force of ordinary similar products is 100N, and stroke is about 40MM/1.6").
2. Leading Technology: The working time to cut fuel supply to stop is ≤1.5 seconds, and the machine will stop automatically when the work is in place; the internal relay is controlled by the travel switch.
3. Long Service Life: It can work for more than 50,000 cycles under normal use.
4. Small Size & Easy Installation: It can be directly installed on fuel injection pump, or it can be equipped with a flexible shaft and steel wire rope assembly, and choose an appropriate location for installation.
5. Sophisticated Material: The shell material boasts high strength, high hardness, flame retardant and antifreeze, impact resistance, aging resistance, etc.
6. Low Price: The price is much lower than that of shut-off solenoid valve used in large quantities on the market, which can reduce the production cost.
Package Included:
- 2 x Engine Stop Solenoids
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On 19/09/2022 at 19:40:28 AEST, seller added the following information:
