The Aviom D400-Dante A-Net Distributor is a 2 RU rack-mountable device designed to deliver power and audio to up to eight Aviom personal mixers such as the A360, A320, A-16II, and A-16R.
The D400-Dante includes eight A-Net outputs designed for use with Aviom personal mixers. These eight outputs feature isolated (floating ground) DC power for providing remote power via Cat-5e to Aviom personal mixers. Additionally, it includes an unpowered A-Net Out, which can be used to connect additional A-Net Distributors, output modules, or other compatible devices.
The D400-Dante A-Net Distributor adds connectivity for a Dante digital audio network, allowing up to 32 channels to be sent directly from a Dante audio network to A320 and A360 personal mixers. Any 32 Dante channels may be selected from the Dante network using the Dante Controller software.
The D400-Dante is powered by an internal power supply, with a detachable power cord and IEC power inlet on the rear panel. The rear panel features a voltage selection switch that allows you to set the unit for 115 or 230 VAC operation. All network connections on the D400-Dante use RJ45 connectors.
Technical Specifications
| A-Net Input/Output | Out: 1 x Pro16e A-Net; RJ45 Connector, Unpowered Out to Personal Mixers: 8 x RJ45 Connectors, Powered |
| Dante Interface | 32 Channels (44.1/48 kHz) |
| Stereo Linking | 2 x 8-Position DIP Switch Blocks (1-16, 17-32) |
| Connectors | 1 x RJ45 for Primary I/O 1 x RJ45 for Secondary I/O |
| LEDs | Red: Power On Green: Network Sync Dante LEDs: Green: Network Activity Yellow: 1 GB Active |
| Power Supply | Internal, IEC Connector |
| Input Voltage | 115 or 230 VAC (with Selector Switch), both +15/-22% at 220 W Maximum; 50 to 60 Hz |
| Output Voltage | For Personal Mixers: 24 VDC, 0.5 A Transmitted over the Cat-5e Cable |
| AC Fuses | 115 V Range: T2.5AL/250V 230 V Range: T1.25AL/250V |
| Rack Units | 2 RU |
| Dimensions | 19 x 7.4 x 3.5" / 48.3 x 18.8 x 8.9 cm |
| Weight | 12 lb / 5.4 kg |