Graphic Kit Fits
2003 2004 2005 2006 2007 2008 2009
YAMAHA YZ250F
YAMAHA YZ450F
*PLASTICS NOT INCLUDED*
Graphic Kit Includes
- Left and Right Shroud Decals
- Front and Rear Fender Decals
- Left and Right Swingarm Decals
- Left and Right Lower Fork Guard Decals
All
Graphics are printed and laminated with the most durable materials
available on the market today. We also use a unique Air Release Formula
Media which allows micro air-bubbles to escape from under the graphic
material, this helps ease of application, reducing ripples and air
pockets.
Correct installation of you graphics is vital to ensure you get the best results from our product.
BEFORE INSTALLATION:
First,
you will need to prepare your plastics/surfaces for your graphics to
adhere properly. Remove any old graphics/stickers from the
plastics/surfaces and ensure that they are entirely clean. Applying heat
to old graphics or stickers will soften the adhesive and will make the
removal process easier. All surfaces, especially brand new plastics,
need to be wiped and cleaned using an appropriate adhesive removing
solvent - We recommend that you use methylated spirits or a contact
cleaner. Allow surfaces to air dry before installing your new graphics.
INSTALLING GRAPHICS:
Take your time when installing your new graphics, as rushing the process will increase the likelihood of making mistakes.
Carefully
align the graphic decal with the corresponding plastic piece. Begin to
peel some of the backing paper off of a small section of the graphic
decal and stick it to the plastics surface. Gradually remove more of the
backing paper as you proceed to install the graphic decal, ensuring
correct alignment with the plastic. If you find that the decal is
starting to ripple, or you need to bend/stretch the graphic to conform
to the shape of the plastic, use a hair dryer or heat gun to make the
decal more pliable. Do not over heat the graphics material though, only a
small amount of heat is required. Once all of the graphic decals have
been installed correctly, it is recommended that you heat all the newly
installed decals on the bike to securely set the graphics adhesive to
the plastics.
AFTER INSTALLATION:
Check
your graphics the next day and apply heat on any areas that may have
lifted overnight and press them back down, repeat this process for any
areas that continue to lift - they will stay down after a few tries.
LEAVE
THE NEWLY INSTALLED GRAPHICS ON THE BIKE FOR UP TO 72 HOURS AFTER
INSTALLATION BEFORE RIDING THE BIKE. To ensure you get the most out of
your graphics decals the adhesive needs this time to set properly.
Riding sooner will reduce the life span of your graphics.
If
you are unsure about any part of the installation process and require
further information, we recommend that you consult one of the many
graphics installation tutorial videos available online.