Description:
- The remote switch remotely controls the electrical equipment on the aircraft model via a switch channel on the remote control, and the 1-way LED dynamically demonstrates the current switch status in real time, so you can get started quickly without the need for an operating manual.
- This device does not require calibration and can be accurately compatible with remote control devices of various brands.
Feature:
- Small size and light weight
- Transparent heat shrinkable adhesive, stylish in appearance, at a glance
- 1 channel servo signal input, control one way electronic switch
- Maximum 20A current
- One way LED indicates working status
- With boot protection, easy to operate
- Input channels do not need to be calibrated, compatible with all brands of remote control devices
- Only 5V voltage receiver is supported, otherwise the module may be damaged. If the receiver and the servo are using a high voltage system, the module should be added with a buck module.
Application range:
- Remote control model rocket launch
- Remote control model smoke control
- Weapon system control like real machine
- Smoke control of the model aircraft
- Control of various remote switching systems
- Switch the signals of the two cameras
- Control the opening and closing of various electrical power sources, such as navigation lights, searchlights, strobe lights, buzzers, etc.
- Control the camera shutter or switch the camera's recording and camera mode.
Typical application:
Connect
- Plug the signal input cable into an idle receiver channel that corresponds to a switch on the remote.
- The power indicator will be illuminated when connected to the receiver.
- The work indicator lights up when the switch channel is open and vice versa.
Working mode
- The red LED light is the power indicator.
- The green LED indicates the relay's working status.
Trigger
- Turn the switch on the remote control (OFF->ON), the green LED lights up and the relay starts to work.
Package:
- 1x K1 RC Relay Switch