- Wheel Spacers
- For ACURA
- For AUDI
- For BMW
- For CHEVROLET
- For DODGE
- For FORD
- For HYUNDAI
- For INFINITI
- For JEEP
- For LAND ROVER
- For LEXUS
- For MAZDA
- For MERCEDES-BENZ
- For MINI
- For MITSUBISHI
- For NISSAN
- For PORSCHE
- For SAAB
- For SCION
- For SUBARU
- For SUZUKI
- For TESLA
- For TOYOTA
- For VOLKSWAGEN
- For VOLVO
- Wheel Adapters
- Wheel Hanger
- Hub Centric Rings
- Titanium Wheel Lug Bolts
- Aluminum Wheel Lug Bolts
- Aluminum Wheel Lug Nuts
- Other
Quantity | 1Pcs | Material | Titanium Ti-6AL-4V |
Thread Pitch | M14x1.5 / 14mm*1.5 | Manufacturing Process | Forged |
Coloe | Nitrogen Blue | Anti-Rust | Hard Anodizing |
Head HEX | 14mm | Magnet | Noedymium |
Safe Torque | 15-20 NM | Magnetism | Magnetic |
Plug Weight | 20g | Fits Models | Most- Honda, Mitsubishi, Mazda, Suzuki |
Gasket | Pure Copper 3-4 Pieces | Authorization System | Yes |
- Forged Lightweight Ti6Al4V with 500°C Heat Resistance, Safer
- Powerful Neodymium Magnet Remain Great Function at 230°C, Safer
- Pure Copper Gasket Design Eliminates the Potential Oil Leaks, Seal Better
- 6.5mm Diameter Magnet Offers Stronger Magnetism and Wider Magnetic Coverage
- Permanent Magnetism, Reusable during Routine Maintenance Oil Changes
- Worry-free Lifetime Warranty, Friendly Customer Service, Better
- Welcome To Be Our Distributor
FAQ & Tips
1. What are the Pros of installing a Ti-6Al-4V magnetic oil drain plug kit?
Uncontaminated motor oil is always best for your Cars. In daily use, the continuous friction in your engine will create tiny metal particles, which contaminate the oil. These particles are about 25 microns. Common oil filters capture particles only larger than about 35 microns, which means they will not catch these smaller particles for you. If not cleaned up, they will be circulated millions of times in your engine over time. The magnetic drain plug is designed to protect your engine. The magnet part will adhere to the metallic particles in the oil, keeping the oil clean. The oil will flow more smoothly through your engine. In return, you will increase the performance and lifespan of the engine. This also decreases the chance of oil oxidation, you don’t have to change the oil frequently.
2. Why is BONOSS Titanium magnetic oil drain plug worth your choosing?
BONOSS forged Titanium magnetic oil drain plug consists of a standard bolt with a neodymium magnet and a pure copper gasket (or Fluorine rubber ring). It is an effective design that makes the plug seal better, preventing the oil pan from unwanted leaks. The diameter of the magnet part is up to 6.5mm, which provides stronger magnetism and wider magnetic coverage. This allows it to better collect metal particles and other harmful metallic fragments in the engine oil, effectively removing them from circulation. They are made of high-strength Ti-6Al-4V Titanium, even at extreme temperatures up to 400 to 500°C, they maintain great performance, preventing the plug bolt from loosening. The magnetic part adopts a neodymium magnet with permanent magnetism, which maintains good function even at 230°C, far past the working temperature of engine oil. You can reuse it during routine maintenance oil changes.
3. Is using a magnetic oil drain plug safe on My car?
Using magnetic oil drain plug is a very popular and safe practice for protecting your engine. If you use a quality magnet oil pan plug and install it correctly, it can make your engine even safer. The main purpose of installing a magnetic oil drain plug is to remove all the metal debris that your oil filter misses, extending the lifespan of your engine. The metal particles that promote the process of oxidation have adhered to the magnet, then the oil oxidation reduces effectively. This adds insurance to engine health. Products designed with precise data not only offer a perfect install experience but also guarantee safety. The precision of BONOSS Forged Titanium Magnetic Oil Drain Plugs has been maintained at 0.02mm, which offers better safety as well as a smooth installation experience. This is far ahead of other competitors. For more details, check on Are magnetic oil drain plugs good or bad.
4. What are BONOSS magnetic oil pan plugs made of?
When talking about safe oil drain plugs, material selection can be very important. There are mainly Aluminum and Titanium. Considering the strength and lightweight needs, Titanium is more suitable. Titanium alloys possess high mechanical properties, not only have great fatigue strength and tensile strength performance but also maintain great strength at extreme temperatures up to 400 to 500°C. They are light in weight, also have extraordinary corrosion resistance. Due to the forged process, they become hard and tough. The strength is greatly enhanced. The magnetic part uses a high-strength neodymium magnet, this allows it to work well even in high-temperature conditions. It can operate in temperatures to 230°C, far past the working temperature of engine oil. For more details, check on How to choose the best magnetic oil drain plug.
5. How does the gasket design work on the Mazda magnetic oil drain plug?
Each Mazda Titanium magnetic oil pan plug comes with a pure copper gasket (or Fluorine rubber ring). It is an effective design that make the plug seal better, preventing the oil pan from unwanted leaks. BONOSS aims to provide magnetic oil drain plugs for Mazda engines with more additional functions, safer, higher performance, more professional design, and better installing experience. BONOSS independent design department insists on professional manufacturing and continuous optimization of the design.
If you have a magnetic oil drain plug available, the first thing you need to do is to prepare some hand tools like a socket wrench and a torque wrench. Now, run your engine for only a couple of minutes, warm the motor oil, because a warm oil drains faster than cold. But don’t make your engine reach the full operating temperature, because the oil will be too hot to safely drain.
You can do this with a car lift or drive your car onto two ramps. Making sure your car pack on a level surface safely. Remember to apply the parking brake and then remove the key. To add insurance, you can place chucks behind each wheel to prevent a sudden slip. Get your safety glasses and gloves on.
The vehicle’s service manual will help you locate the oil drain plug. Before removing the drain plug, remember to position an oil waste pan beneath the oil drain plug. This ensures the oil flow at an angle into the waste pan. And then, loosen the plug with a socket wrench.
Now carefully unscrew the stock plug by hand, but don’t completely remove it. Hold the plug to keep oil from rushing out until you are ready to remove the plug from the hole. Removing the filler cap will make the draining process faster because air can enter from the top. You can locate it with the help of your owner’s service manual. Be cautious! The draining oil may be hot.
When all the old oil is drained, remove the stock oil plug by hand. Wipe the drain hole with a soft cloth, make sure the contact surface is clean. Carefully install BONOSS magnetic oil drain plug. Tighten by hand, making sure it’s not cross-threaded. Just put it in place and fasten them a bit. After the magnetic plug is hand-tight, use a torque wrench with the manufacturer-recommended torque specification to secure it properly. The plug kit includes a pure copper gasket (or Fluorine rubber ring), don’t leave it aside. It helps seal off the drain hole, preventing the oil pan from unwanted leaks. Never over-tighten the drain plug.
Pour in the proper amount and type of motor oil specified for your vehicle. Then run your engine, check the area around the oil drain plug to see if there is an oil leak. If there is a leak, stop the engine and repair it. If there is no leak, shut off the engine and let it rest for a few minutes to make the oil drain down.
Remove all the chucks and drive off the ramps safely. Now, you’ve completed the installation of a new oil drain plug! Remember to dispose of old oil and the oil plug properly. It is always a great idea to regularly inspect the tightness of the oil drain plug, especially soon after installation. Give the drain plug another check after 25,000 miles of driving to make sure they’re still in place well and tightly.
--All Orders that Payment is received before 5pm Beijing Time M-F will be shipped the same day, if received after that time, they will be shipped the next business day, Saturday and Sunday orders will be processed and Shipped on Monday.
--All orders are shipped by DHL/FedEx/UPS within the continental United States. Other international Shipping is available. You need to contact us confirming express method and accounting shipping costs.
--Your purchase will be shipped via standard airmail, which normally takes 3-10 working days to arrive.
--We will provide you with tracking numbers when the item is shipped out.
BONOSS(Formerly BLOXSPORT) have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic...), wheel spacers(3mm-120mm, 1" inch etc.), custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud,lug nut(passed the 1 Million times Fatigue Test,etc.).
We always insist on four concept respectively:
1.insistence on the service philosophy that safty is No.1 and creating the value for our customers.
2. insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability.
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers).
