FIBARO Single Smart Module (FGS-214) The new FIBARO Smart Module (FGS-214) is a smart Z-Wave wireless module which can control a maximum load of 6.5A in one channel.

Control the ON-OFF function of one circuit or appliance remotely or using a wall switch
Can be used as voltage free relays (dry contacts)
Compatible with all Z-Wave networks
Acts as a repeater expanding your Z-Wave network
Wide range of compatibility with existing light fittings and does NOT require expensive cabling
Latest generation Z-Wave 500 series chip
Z-Wave Plus certification
Supports secure mode (Z-Wave Network Security) encrypted with AES-128
Dry contacts - this is important. It means that the new FGS-214 can be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.

The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.The FIBARO Smart Module(FGS-214) is a smart Z-Wave controller capable of remotely operating your existing light and appliance fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.
This FIBARO Smart Module (FGS-214) requires 3-wire (including neutral) installation and works with an AC (230V) power supply.
The FIBARO Smart Module (FGS-214) also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.
This product integrates with Australian certified (921.42 MHz) Z-Wave Controllers -Fibaro Home Center 3
FIBARO Home Center 2
FIBARO Home Center 3 Lite

Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using the Fibaro's user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device's user manual. In most cases your device's default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device.
Please check the maximum load before installing or operating.
This installation must be done by a certified electrician in Australia and New Zealand.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim you have to provide installation compliance certificate from your electrician.
Manual:
⇒ FIBARO Smart Module Manual

Technical Specifications
RF Protocol Z Wave RF Frequency 921.42Mhz AU/NZ approved RF for Z wave Z Wave device type Z-Wave Switch, Routing Slave Power 230V 10% 50/60 Hz Operation Range Up to 20 m indoors with no obstacles Application Indoor use only, up to 6.5A load Operation temperature 0 ~ 55 oC Storage temperature 10 ~ 80 oC Weight 50g Housing ABS Compliance EN 55015, EN 60669-2-1 Regulatory Compliance Mark
N5496 Dimensions
(LxWxH) 42mm x 37mm x 17mm

Official eBay Store

FIBARO Single Smart Module

FIBARO Single Smart Module (FGS-214)

The new FIBARO Smart Module (FGS-214) is a smart Z-Wave wireless module which can control a maximum load of 6.5A in one channel.

Control the ON-OFF function of one circuit or appliance remotely or using a wall switch
Can be used as voltage free relays (dry contacts)
Compatible with all Z-Wave networks
Acts as a repeater expanding your Z-Wave network
Wide range of compatibility with existing light fittings and does NOT require expensive cabling
Latest generation Z-Wave 500 series chip
Z-Wave Plus certification
Supports secure mode (Z-Wave Network Security) encrypted with AES-128
Dry contacts - this is important. It means that the new FGS-214 can be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.

This FIBARO Smart Module (FGS-214) requires 3-wire (including neutral) installation and works with an AC (230V) power supply.

The FIBARO Smart Module (FGS-214) also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.

This product integrates with Australian certified (921.42 MHz) Z-Wave Controllers -Fibaro Home Center 3

FIBARO Home Center 2

FIBARO Home Center 3 Lite

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using the Fibaro's user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device's user manual. In most cases your device's default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device.

Please check the maximum load before installing or operating.
This installation must be done by a certified electrician in Australia and New Zealand.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim you have to provide installation compliance certificate from your electrician.

Manual:

FIBARO Smart Module Manual

Technical Specifications

RF Protocol	Z Wave
RF Frequency	921.42Mhz AU/NZ approved RF for Z wave
Z Wave device type	Z-Wave Switch, Routing Slave
Power	230V 10% 50/60 Hz
Operation Range	Up to 20 m indoors with no obstacles
Application	Indoor use only, up to 6.5A load
Operation temperature	0 ~ 55 oC
Storage temperature	10 ~ 80 oC
Weight	50g
Housing	ABS
Compliance	EN 55015, EN 60669-2-1
Regulatory Compliance Mark	N5496
Dimensions	(LxWxH) 42mm x 37mm x 17mm

SHIPPING RETURNS PAYMENT

SHIPPING

We use Australia Post! Items are typically shipped the same if ordered before 11am or the following day from our warehouse in Sydney, Brisbane or Melbourne.

You can choose:

Free shipping if over a certain value using Sendle

Australia Post Standard $9.99

Australia Post Express $15

Startrack Premium for $20.

New Zealand we charge a flat rate of $23

International shipping we charge $50.

For shipping times please refer to the Australia Post website.

We cannot guarantee delivery times as the operations of couriers are not within our control. Delivery times change depending on the time of year and the courier's website should be consulted for reference. We ship most of the orders from Melbourne.

We are committed to being a sustainable company and always choose the most sustainable ways of running the business this is why we have chosen a carbon neutral delivery service and we only use satchels that are biodegradable or recycled cardboard boxes.

DO NOT leave messages to couriers as we cannot guarantee any messages will be accepted and followed by them.

FAULTY ITEMS
All our products carry a 12-month guarantee if you have any problems with any of our goods within the guarantee period.

Please get in touch with us to apply for a refund or exchange.

support@ozsmartthings.com.au

Payments are due Immediatly

ABOUT OUR COMPANY

Since 2017, we have been working to create a platform that brings Australians the best range of products in the Home Automation ever innovating field. We love how technology can transform our daily lives, and this market will have as many users as smartphones in the future. We are excited to be part of the beginning of Australia's path down that road!