OBD2 KINGBOELN YA200 Car Diagnostic Tool
with full OBD2 functions and real time Voltage test battery test one click VIN scan For engine check and DTC lookup
PLEASE NOTE: This tool will only read engine-related faults. It cannot read other fault types such as ABS, airbag, EPB etc. Please send us a message if you need more functions than this, and we will find the right tool for your vehicle
The KINGBOLEN YA200 is a code reader with complete OBD2 Functions Read/Clear DTCs, I/M Readiness Check, Live Data Stream Viewing, Freeze Frame Data Viewing, O2 Sensor Test, On-board Monitor System Test, EVAP System Test, Vehicle Information Retrieval along with advanced DTC Lookup function.
KINGBOLEN YA200 support Complete OBD2 Function
1. Reading Codes
Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset
Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4. I/M Readiness Status:
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. Read Live Data Stream
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6. View Freeze Frame Data
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7. O2 Sensor Test
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8. On-Board Monitor Test
Retrieves and displays test results for emission-related powertrain components and systems.
9. Read Vehicle Information
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10. Component Test
Certain vehicle components can be actuated by commands sent from the scanner to test their operability
Support languages
9 Kinds of Languages supported.
English, French, Russian, German, Italian, Spanish, Portuguese, Polish, Traditional Chinese
KINGBOLEN YA200 support Real-time Voltage Test
It can display the voltage of OBD diagnostic socket and the status after evaluation. It mainly feeds back the current voltage condition of the diagnostic socket or the battery condition.
* If the voltage of the battery is lower than 12V, it is recommended to go to the professional tester to diagnose the current battery condition.
One-click design makes diagnosis easier and faster
1. One-click I/M Readiness:
Quick checks emission readiness status and drive cycle status
2. One-click DTC
Looks up definitions of Pending Codes stored in the scan tool and shows the possible causes of the DTC (Not every DTC with possible causes reason).
3. One-click VIN
Displays the vehicle's identification number.
KINGBOLEN YA200 support Screenshot Function
you can take screenshots during the use of the YA200 code scanner to record the diagnosis results at any time.
Just press the up and down keys for 3s-5s to take a screenshot, which can store up to 10 pictures.
KINGBOLEN YA200 support Lifetime Free Update
KINGBOLEN YA200 OBD2 comes with Lifetime Free Update, which can be upgraded simply by connecting to a PC with a USB cable.
KINGBOLEN YA200 Code Reader meets the following protocols
1. SAE J1850 PWM (41.6 Kbaud)
2. SAE J1850 VPW (10.4 Kbaud)
3. ISO 9141-2 (5 baud init, 10.4 Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
KINGBOLEN YA200 support more than 10,000 car models
American (USA) cars:
Compatible with Standard OBD2 Cars from 1996 to Now:
For Chrysler, for Ford, for GM, for Jeep...
European cars:
Compatible with Standard OBD2 Cars from 2003 to Now:
For Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Volvo, for VW, for Ford, for Jaguar...
France cars after 2006:
for Citroen, for Fiat, for Renault, for Peugeot
Not Support for Renault Clio 2/Megane/Dacia Logan..
Asian cars:
Compatible with Standard OBD2 Cars from 2007 to Now:
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota....
Chinese car:
Compatible with Standard OBD2 Cars from 2009 to Now:
for BYD, for Chery, for Geely, for Great Wall, for Karry...
Please note: KINGBOLEN YA200 is only for 12V 16PIN OBD2/EOBD Car engine diagnosis.
* Does not support Trucks, semi-trailers, dump trucks, tractors, hybrids, electric vehicles and other commercial vehicles.
Technical parameters of KINGBOLEN YA200
1. Display: 320 x 240 pixel display with TFT color screen.
2. Operating Temperature: -10°C to 40°C (14°F to 104°F).
3. Storage Temperature: -20°C to 70°C (-4°F to 158°F).
4. External Power: 9.0V to 16.0V power provided via vehicle battery.
5. Product Size: 137 × 79 × 22 mm (5.4"×3.1"×0.9").
Packing List of KINGBOLEN YA200
1. KINGBOLEN YA200 Code Reader
2. USB Cable
3. User Manual
