Set of two (2) CUSTOM "standing seam" Toyota PINCH WELD ADAPTERS that perfectly match the official Toyota or Lexus jacking points specified in the factory service manual.

USING AN UNSTABLE JACK STAND CAN RESULT IN THE CAR SLIPPING OFF RESULTING IN MAJOR DAMAGE TO the pinch welds, the chassis and the expensive side skirts of the rocker panels.

Fits "pinch weld" jacking points with two notches on the bottom for in Lexus and Toyota cars and crossover utility vehicles.  Lexus and Toyota models use  common pattern is the "knife edge" thin vertical flange that consist of two vertical edges spot welded together. 

Will NOT fit some newer TNGA models with a welded on downward blade on the bottom.

If the top of your scissors jack consists of two unequal sized contact points with the wider one placed toward the inner part of the body, this adapter will provide a perfect fit.

Using the wrong jack or pinch weld adapter will bend and damage the "knife edge" pinch weld.  The weight of the car with 'knife edge" pinch welds should correctly be supported by the reinforced pad behind the pinch weld, NOT by the 'knife edge." 

The adapters are made of exceptionally durable UHMW PE used in bullet proof vests and high tensile fishing line and ropes.  It is fastened to the machined 6061-T651 aluminum angle frame with hardened industrial countersunk high grade screws.  The entire assembly is then drilled and tapped to receive a custom machined high strength steel post that fits into the precision mill drilled top of the saddle of the jack stand.

 The tops of either shallow saddle malleable iron saddles of standard ratchet stands of many brands or aluminum stands need to be drilled with a 5/16 inch bit vertically to a one inch depth to receive the attachment post of the adapter block.  Removing the adapter block allows the jack stands to be used in the usual manner.  Additional adapters for other cars are available for other chassis sockets or pinch welds.  A DRILL PRESS IS RECOMMENDED FOR THIS MODIFICATION.


Compatible ALUMINUM pin adjustable Torin Big Red Type jack stands include:


Torin Big Red T43004


TCE 3 ton aluminum


 Harbor Freight Daytona


Sunex 1003AJ


Power Zone  68066


Schwaben  3 ton aluminum


Jacko 3 ton aluminum


NAPA Carlyle # NLE 7916455


OTC SA02  2 ton aluminum

This sale is a set of two(2) custom made pinch weld adapters to fit drilled steel or aluminum jack stands. No jack stands or Toyota-Lexus car parts shown are included in this offering..

Shipping and handling is via eBay calculated USPS Ground Advantage Mail package to any location within the 50 United States.