XC/Gravel 29er(700c) wheels built using DT Swiss XR391 rims with Novatec hubs. 

Rims are the high quality DT Swiss,XR391 model designed for modern technical XC racing but equally suitable for gravel bikes with wider tyres. Welded joint construction and 25mm internal width. 

Hubs are by Novatec. 6 bolt disc fixing (centrelock also available in options below). Choice of Shimano HG, SRAM XD or SRAM XDR freehubs (Shimano Microspline available with some of the option hubs).  

The front hub has a choice of QR, 12x100, 15x100 thru axle and the rear hub has a choice of QR or 12x142. 

The 32 spokes per wheel are the high quality black DT Swiss Competition 2.0/1.8/2.0. Made from 100% stainless steel and fastened with the correct DT Swiss PHR washers and Squorx alloy nipples.

The wheels are built using a 3x (3 cross) pattern which is the best compromise between strength without excess weight.

Total wheelset weight for standard build around 1788g 

Options:

Sapim D-Light spokes - saves 40-50g + £15 for silver or £35 for black

Sapim CX Ray aero spokes - saves 130g + £100 for silver or £120 for black

DT Swiss black brass nipples +£16

Coloured alloy spoke nipples (red, orange, green, blue, black, gold, purple) +£18

Bitex BX201/MTR12 6 bolt disc hubs +£45

Bitex BX106 centrelock hubs +£45-£65 depending on freehub needed - HG,XD,XDR, Microspline and Campag 13 speed N3W available

Hope Pro4 6 bolt disc or RX4 centrelock hubs in various colours and axle combinations +£135 - stronger overall and with better water sealing.

Shimano XT8110 12 speed Microspline centrelock hubs +£65

Shimano XTR9111B 12 speed Microspline centrelock hubs - saves 55g +£225

Fitted tubeless rim tape and bolt in valves + £18/pair

Please specify axle and freehub requirements when you order. Also any optional extras which will be invoiced separately.  For Boost hub versions, see our other listing.

If you would like to buy wheels with any of these options send a question or contact us through the website below.

 All our wheels are handbuilt to the same high standards. Rims are true to +or- 0.2mm and spokes uniformly tensioned to within 10%.

Please look at the other wheelsets and products available in our shop. If you are looking for something special or have specific needs, please contact us for a custom build quote.

Visit our website for more technical detail at www.spokesmanwheels.co.uk

If you have any questions please ask. Thanks for looking,

Mark