New 3/4/5 Axis Cnc Offline Controller Ddcs-expert Supports Tool
Magazine/atc Stepping Drive Instead Of Ddcsv3.1
Introduction:
The system DDCS-EXPERT is a professional 3-5 axis motion controller based on an
embedded platform. It is equipped with a 7-inch full-color screen, full keyboard
input, and customizable function keys to make user operation more convenient. It
supports multi-process, straight-line tool magazine, circular Disk tool magazine
function. The interface and structure adopt the mainstream method in the market,
with simple operation, easy to learn and understand, and convenient
installation. The system uses advanced adaptive speed forward control algorithm,
which has the characteristics of high processing efficiency and good surface
quality. Meet the needs of various engraving machines, engraving and milling
machines, cutting
Feature:
Max. 5 Axis;2-4 Axis linear interpolation, any 2 axes circular
interpolation;
7 inch full color display screen;resolution ratio: 1024*600,40 operation
keys
24 photoelectric isolated digital inputs,21 photoelectric isolated digital
outputs
Analog spindle control 0-10V spindle control, support PWM Output
Magazine type: Multi-operation, straight row tool magazine and disc
Magazine
Probe Mode: Support auto-probe and manual probe
Probe of Fixed position of tool sensor, Probe of Floating tool sensor,
first probe/second probe;
Backlash compensation methods: direction gap compensation, radius gap
compensation, length compensation;
Interpolation Algorithm:S type, circular hard algorithm, circular soft
algorithm;
Language: Chinese, English;
Software Alarms: Program Error, operation Error, overtravel Error, Driver
Error and so on
Network: Support file share and online machining the remote files
Differential output for Pulse and Direction signal, max. interpolation
pulse output frequency 1Mhz
Spindle control mode, Mul-speed (4 lines 16 kinds speed), Servo Spindle
Compatible with standard G-code, support popular CAD/CAM software, such as
ArtCam, MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360, and so on.
The control system can preview the processing path before machining, and
it makes the system more steady, working smoothy and precise
Support high-speed machining in continuous Polyline segment, the system
can choose a most efficient algorithm automatically from different kinds
Polyline segment algorithm;
Support unlimited size file for machining
Support Breakpoint resume, “Power Cut” recovery, Try Cut, Start from
Nearest Point, Start from the specific line
Support time-lock function;
Support 4 kinds of operation rights: visitor, operator, admin, super admin
DDCS-EXPERT requires two power supplies, the
main power supply is used for the controller system, and the IO port power
supply is Used for input and output and MPG port. Both power sources are 24VDC
and the current is 3A. Power input port, marked with 24V and GND is the main
power input port; in the IO power input Ports, COM+ and COM- are input/output
ports and power input ports of MPG. Please keep Please remember that the
controller can work normally only if the two power sources are connected
correctly Appropriately. Many new users only supply power to the system, and
then there are limited switches, relays, MPG and The spindle does not work at
all, then please check if it is still supplying power to the IO port. The IO
power supply supplies power to all IO ports, including restricted switches,
relays, MPG, Etop and All other input and output ports, without it, the spindle,
MPG, input and output ports will not work. In order to avoid electrical noise,
it is strongly recommended to use two separate 24V power supplies Supplies. In
order to avoid high frequency electrical noise from the power cable, it is
strongly recommended to install a noise filter at the power input end of the
switching power supply
Introduction to inverter wiring:
In the analog spindle, the speed control output terminal can output 0-10V. It
can be adjusted By sending a voltage between 0 to 10V to the VFD, the speed of
the spindle motor Spindle speed setting. Use VFD (Variable Frequency Drive) to
control the speed of the spindle, only need to start /Stop signal and 0-10V
signal to control the frequency. The wiring method of the FOR port is the same
as that of the normal output port. FOR is used for spindle forward output or
start/stop output; The analog circuit is isolated from the power output, do not
short-circuit ACM and COM- (DCM); If you only need the start and stop commands
of the spindle, you only need to connect the FOR output port The structure of
the controller with the start input port of the inverter
|
1.Your
valid phone number is very necessary for the shipping,
otherwise we can't guarantee that the package would
safely arrives.
2. Any Customs tax applied to this package should be
covered by buyers.
3.As has been stated on
the eBay item description, Import duties, taxes and
charges are not included in the item price and shipping
charges. These charges be at the buyer responsibility.
meanwhile the customs tax depend on the buyer local
customs office. |
What in Package:
1 x cnc controller (3, 4, 5 axis optional)
1 x usb extension cable
1x4gb usb flash disk
1 x Network Cable
|
Contact
Us:
1. We
have
always
been
trying
to
provide
the best
service
and
reliable
products
for
every
customer,
however,
accident
may
happen
sometimes,
please
contact
us to
resolve
any
issue
before
leaving
a
negative
feedback.
2.
Please
contact
us by
"Ask a
question".
Payment
1.
Payment
methods
accepted
:
Paypal
only.
2.
Payment
must be
received
within 7
business
days of
auction
closing.
Shipping
1. We
ship
your
orders
within
1-2
business
days
after
the
payment
received.
2. Item
shipped
via
Singapore
Post or
HongKong
Post ,
It takes
about
7-14
business
days (USA,CA,AU,UK).others
country
10-20
business
days(Brzil,India,RU),Exact
delivery
time
depends
on
postal
process.
3. If
you do
not
receive
your
item(s)
by 30
business
days,Please
feel
free to
contact
us via
ebay
mail
system ,
we will
try our
very
best to
resolve
any
problems
with
you
Return
Policy
1.
Return
is
accepted
within
14 days
after
the
buyer's
receiving
the
item.
2. If
this
item is
defective
upon
receipt,
customer
has up
to 14
days
from
date of
receipt
for
exchange
of a new
one.
3.
Unused/unopened
merchandise
will be
fully
credited.
Other
Policies
We are
not
responsible
for any
custom
duty or
import
tax.
If you
need we
write
low
price on
shipping
bill,
pls
leave
message
when you
make
payment
.
All
emails
will be
answered
within
24
hours.
If you
do not
receive
our
reply,
please
kindly
re-sent
your
email
and we
will
reply to
you as
soon as
possible,
Suggest
send
eBay
message
to us,
That is
easy to
find .
|
|
|
|