The MXion DRIVE-XS is the smallest locomotive decoder we have. It has 3 function outputs with 20 effects each and has function mapping up to F68. All contacts are designed as solder pads. This means that the small decoder can be installed in Z-H0 size locomotives. The engine power is sufficient for this. All functionality of the two function outputs (e.g. TV, on or off delay, neon, gas lamps, fire, dimming, etc...) corresponds exactly to those of the DRIVE-S. The decoder can also be ideally used as a small function decoder thanks to its 3 outputs.

Functions at a glance:

• 14, 28 and 128 speed levels
• 256 internal speed levels
• 10239 locomotive addresses

• 3 functional outputs
• Programmable driving curve
• Start-up, medium and maximum speed (as well as delay times)
• Parallel control for all light and function outputs
• Function outputs dimmable + effects
• Programmable flashing light, short-term and clock function (gear or simulation) as well as over 20 lighting effects per output
• 20 light patterns can be selected per output (various flashing, petroleum, sodium, neon, neon defective, US lights, and much more)
• 8 conditions can be selected for each output (permanent, only when driving, only forward, etc.…)
• Simple function mapping for all function outputs
• All function outputs freely addressable (F1 to F68)
• Total load capacity of 0.8 amps (motor output stage and function outputs)
• Motor output stage can be loaded with 0.5 amps
• Overload and temperature protection for motor and function outputs
• Reset functions for all CV values
• CV reading
• CV writing
• Write CV bit by bit
• POM – Program on Main (programming on the track)
• 10x16x4.5mm in size