0.5 liter ready-to-spray water-based paint deep candy Braun metallic car paint color

0.5 liter ready to spray (pre-thinned) waterborne basecoat

Deep Chocolate Candy Braun Metallic


This waterborne basecoat must be overcoated with a 2K clear coat.


Ideal for painting vehicles, motorcycles, trucks and much more...
This water-based paint is easy to work with and brings your paintwork up to date.


With every paint order you will receive free of charge:

1 pair of painting gloves

1 mixing cup

1 paint strainer


processing

Processing temperature at least 20°C.

Sand the surface to be painted with grit P500 to P800 and then degrease well (silicone remover).

When working on new or unpainted plastic surfaces, apply a plastic primer and observe the drying time.

Then apply the filler or a primer

We recommend an epoxy primer (e.g. article number 162527166545)

Sand the surface well with the appropriate grit (P500-P800) or smooth.

Then clean with silicone remover, the surface must be free of dust (we recommend a tack cloth) and grease.

Apply the base coat in 2-3 spray coats, depending on the opacity of the paint. Between the color courses approx. Allow to flash off for 5-10 minutes.

After an airing time of 20-30 minutes (max. 24 hours) the base coat must be coated with a 2-component clear coat.

0.5 liter ready-to-spray water-based paint deep candy Braun metallic car paint color This water-based paint is easy to work with and brings your paintwork up to date. Sand the surface to be painted with grit P500 to P800 and then degrease well (silicone remover). When working on new or unpainted plastic surfaces, apply a plastic primer and observe the drying time. Sand the surface well with the appropriate grit (P500-P800) or smooth. Then clean with silicone remover, the surface must be free of dust (we recommend a tack cloth) and grease. Apply the base coat in 2-3 spray coats, depending on the opacity of the paint. Between the color courses approx. Allow to flash off for 5-10 minutes. After an airing time of 20-30 minutes (max. 24 hours) the base coat must be coated with a 2-component c