1 new extra bright LED taillight / turn signal bulb for older cars, trucks, tractors, scooters, motorcycles, tractors, and more that use a 6-volt double contact DC bulb (dual function bulb) with staggered tabs for vintage motorcycles such asthe Harley Davidson, Yamaha, Honda, and more bikes (see the list below). This bulb is 52mm tall from bottom contact to the top of the lens and slightly over 19mm wide. See the pictures in the ad (last 3). It is brighter, lasts longer, and uses less (50,000 hours) watts (but is 10x brighter per watt). This is a non-polarity bulb so you just plug it in. It will work with a positive ground electrical system.

This bulb will NOT work with an AC system.

Will work with 6-volt DC, 9-Volt DC, 12-Volt DC, 18-Volt DC, 24-Volt DC, all the way to 32-Volt DC system.

This bulb is custom made with a front projection lens, the beam angle is 360 degrees, it has a steel base and an alloy body. One of the brightest bulbs in its class; 500% brighter than a standard bulb! However, it is the front projections that makes it so effective. It's just a better engineered than other bulbs.

This bulb is intended for a 6-volt DC system. It can function as low as 6-volts and as high as 32-volts DC. The voltage at the light socket, at full throttle, should not exceed 32-volts DC. If your machine has AC volts at the light socket this bulb will flicker and burn out in seconds. To get DC volts to your light socket you can wire the light socket directly to a battery with an on/off switch or add an in line voltage rectifier.

If you need a different style bulb please send us a picture, or message us your make & year and we can look up your bulb.