90 DEG. IEC CONNECTOR-HOT CONDITION
Rewireable IEC hot condition, cold connectors with integral notches. The connectors feature screw terminals and cable strain reliefs. UL, CSA and BS Approved. The HOT IEC C15 connector is similar to the IEC C13 connector but has cut-out at the bottom. Usually found on appliances where heat can be an issue e.g. Cisco Switches, HP Procurve switches and DEll Power Connect switches. Suitable for Coffee tank / Food trolley connection cable connector IEC 60320 C15 250V 10A 90 Degree angle. Groove on the middle wire on the wide side of the connector.
Connector Mounting: Cable
Contact Termination: Screw
Current Rating: 15A
Gender: Receptacle
SVHC: No SVHC (18-Jun-2012)
Series: 4784
Voltage Rating: 250VAC
Approval Category: UL, CSA, BS
Case Material: Black nylon
Colour: Black
Connector Mounting Orientation: Cable
Connector Type: IEC
Contact Material: Brass, Nickel Plated
External Depth: 51.25mm
External Length / Height: 21mm
External Width: 70mm
Flammability Rating: UL94V-0
Material: Polyamide 6
Mounting Orientation: 90°
Mounting Type: Cable
No. of Outlets: 1
Termination Method: Screw
Voltage Rating V AC: 250V
Technical Data |
|
Current Rating @250V ac |
15A (UL and CSA), 10A (BS, VDE) |
Body Moulding |
Polyamide 6 Grilon A28VO |
Ratings IEC: 10A / 250VAC; 50Hz
Ratings UL/CSA 15A / 250VAC; 60Hz
Dielectric Strength > 2kVAC between L-N
> 2kVAC between L/N-PE
(1min/50Hz)
Allowable Operation Temp. -25°C to 120°C
Protection Class: Suitable for appliances with protection
class I acc. to IEC 61140
Terminal: Cable
Material: Housing Thermoplastic, black, UL 94V-0
Connector C15 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for hot conditions)
pin-temperature 120 °C, 10A,
Protection Class I
Cable Diameter Max | Wire Size |
8.5mm | 3 x 1 mm² / 3 x 18 AWG |
10mm | 3 x 2.1 mm² / 3 x 14 AWG |