B&M Racing Part Number : 70417
Fits
fits 1984-93 GM 700R4/4L60 w/30 spline input, 1993-1997 4L60E w/30
spline input, and 1997-04 Corvettes. Requires small 10.75-inch bolt
circle flexplate
Please contact us before purchasing , if you are not 100% sure of fitment .
This
Holeshot 2000 fits 1984-93 GM 700R4/4L60 w/30 spline input, 1993-1997
4L60E w/30 spline input, and 1997-04 Corvettes. This converter retains
the lock-up feature. Holeshot torque converters are for serious-minded
performance enthusiasts and offer additional strength and durability
features not found in our Tork Master or Traveler series of converters.
The Holeshot 2000 converter is an excellent choice for vehicles with
some performance engine modifications, particularly big cams that tend
to reduce low-end power and torque. The higher stall speed of this
converter will launch the car in a higher rpm range where more torque is
readily available, resulting in quicker acceleration. Holeshot
converters feature furnace-brazed impeller fins and turbine, a new
precision alloy impeller hub, and new heavy-duty needle bearings. Other
features include fully balanced and pressure tested by expert
technicians. If your vehicle is equipped with a plate-type nitrous
system or supercharger, please refer to the Nitrous Holeshot line of
converters. Notes: Stall speed listings are based on engines producing
230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give
you more stall speed, and less torque at 2,500 rpm will give you less
stall speed than the stall speed ratings indicated. Higher stall
converters can generate more heat, so we highly recommend adding a
transmission cooler. This converter is Not recommended for supercharged,
plate-type nitrous oxide, or trans-brake applications. The product
images shown are for illustration purposes only and may not be an exact
representation of the product. 10.75-inch bolt circle
Features:
- Precision Balanced on Certified Balance Equipment
- Copper Furnace Brazed Impeller and Turbine
- New Precision Alloy Steel Impeller Hub
- Race Proven Technology & Quality
| Additional Contents | New needle bearings |
---|
Automotive Item Grade | High Performance |
---|
Brand |
B&M
|
---|
Emission Code | 5 |
---|
Flexplate Change Needed | No |
---|
Furnace Brazed | Yes |
---|
Indicator Light | No |
---|
Input Spline | 30 |
---|
Lockup | Yes |
---|
Material | Steel |
---|
Product Type | Automatic Transmission Torque Converter |
---|
Stall | 1900-2100 |
---|
Stall Torque Ratio | 1900 to 2100 RPM stall |
---|
Transmission | 4L60 |
---|
| 4L60E |
---|
| 700R4 |
---|
UPC | 019695704179 |
---|
California Proposition 65 Required | No |
---|
Part Number | 70417 |
---|
|
---|