Brand new 24" version of Stans Mk4 Crest wheels for junior/youth riders. Legendary fast and light wheelset for XC, XC Race, Gravel, CX and recreational use. These are the stronger 28 spoke version. For minimum weight look at our other listing for a 24 spoke pair 

  

Rims are the brand new Mk 4 Stans Crest made from aluminium alloy. Wider and stronger and even slightly lighter than the Stans Crest Mk3 rim with a 25mm internal width. The spoke drilling is offset by 1.5mm which improves wheel strength.

Disc brake specific. Designed for MTB tyre widths between 2.00 and 2.30 and all wide Gravel/CX tyres. New discreet graphics.


These rims are designed to be used tubeless (with Stans sealant) but can also be use with Presta valve tubes. 


For more detail on the Mk4 rims see: https://www.notubes.com/crest-mk4-rim

 

Hubs are lightweight Novatec D791SB/D792SB 6 bolt disc or the slightly lighter centrelock version.

Suitable for 8, 9,10 and 11 speed Shimano cassettes and 9,10 and 11 speed SRAM MTB cassettes with a 11T small cog. For SRAM 12 speed MTB cassettes with a 10T small cog please specify a XD Driver freehub. No 12s Microspline version available except with Hope Pro5 hubs.


The front hub has a choice of QR, 12mm or 15mm thru axle and the rear hub has a choice of QR or 12x142. 

 

28 spokes per wheel are the high quality black Sapim Leader 2.0. Made from 100% stainless steel and fastened with black alloy nipples.

The wheels are built using a 2x (2 cross) pattern which is the best compromise between strength without excess weight.

 

Total wheelset weight is around1440g. Centrelock version 25g lighter. Circa 1300g possible with C/L hubs and Sapim CX Ray spokes 


Options:

Novatec centrelock hubs - same cost

Sapim CX Ray black aero spokes - saves 60g + £120 

Coloured alloy spoke nipples (red, orange, green, blue, gold, purple) +£18

Fitted Stans yellow rim tape and bolt in valves for tubeless use + £18/pair

Hope Pro5 hubs +£160


Please specify axle and freehub requirements when you order. Also any optional extras which will be invoiced separately.  For Boost hub version, see our other listing.


If you would like to buy wheels with any of these options send a question or contact us through the website below.


Please note: The version shown in the photos has the optional black Sapim Race spokes.

 

 All our wheels are handbuilt to the same high standards. Rims are true to +or- 0.2mm and spokes uniformly tensioned to within 10%.

 

Please look at the other wheelsets and products available in our shop. If you are looking for something special or have specific needs, please contact us for a custom build quote.

Visit our website for more technical detail at www.spokesmanwheels.co.uk

If you have any questions please ask. Thanks for looking,

Mark