he system is coming up, please wait...


U-Boot 1.1.3 (Dec 12 2011 - 21:05:31)

CPU:   AMCC PowerPC 440EPx Rev. A at 660 MHz (PLB=132, OPB=66, EBC=33 MHz)
       No Security/Kasumi support
       I2C boot EEPROM enabled
       Bootstrap Option G - Boot ROM Location I2C (Addr 0x54)
       Internal PCI arbiter enabled, PCI async ext clock used
       32 kB I-Cache 32 kB D-Cache
Board: Tomtoo
I2C:   ready
DRAM:  Initializing DDRSDRAM 
DQS calibration - Window detected:
max_passing_cases = 53
wr_dqs_shift      = 95
dll_dqs_delay_X   = 30
dll_dqs_delay_X window = 4 - 56
DDR0_09=0x00011d5f
DDR0_22=0x03267f0b
DDR0_17=0x1e005f00
DDR0_18=0x1e1e1e1e
DDR0_19=0x1e1e1e1e
Zeroing SDRAM...   DONE
    DDR: 1024 MB
POST RAM test disabled.
Now running in RAM - U-Boot at: 3fb2f000
trap_init : 0x0
system inventory subsystem initialized 
FLASH: Tomtoo CFI Flash Driver Initialized 
 4 MB

DEBUG: ASIC Reset Enable Register Offset:0x88 Value:0x03...

CPLD: Reseting Bridge & ASIC...
ATA interface setup: io_base=0xf8f00000, port=0x3e0, ctl=0x7ec
PCI:
Skip our host bridge 
        01  00  1657  001d  0280  1a
        00  07  10b5  8112  0604  18
In:    serial
Out:   serial
Err:   serial
Net:   

Checking system RAM - press any key to stop test



Checking memory address: 00100000



System RAM test using Default POST RAM Test succeeded.



set_bootstatus: BS_LOAD_OS, platform_idx = 15 

Type run flash_nfs to mount root filesystem over NFS

Hit ESC to stop autoboot:  5 4 3 2 1 0 
Map file at LBA sector 0xf48e7
## Booting image at 00400000 ...
   Image Name:   Linux-2.6.14.2
   Image Type:   PowerPC Linux Multi-File Image (uncompressed)
   Data Size:    4269595 Bytes =  4.1 MB
   Load Address: 00000000
   Entry Point:  00000000
   Contents:
   Image 0:  3190917 Bytes =  3 MB
   Image 1:  1078663 Bytes =  1 MB
## Current stack ends at 0x3FAEDBE8 => set upper limit to 0x00C00000
## initrd at 0x0070B0D4 ... 0x0081265A (len=1078663=0x107587)
   Loading Ramdisk to 1fef8000, end 1ffff587 ... OK
 initrd_start = 1fef8000, initrd_end = 1ffff587 
## Transferring control to Linux (at address 00000000) ...
Installing Linux 2.6 Kernel
Attempting to find a root file system on hda1...

INIT: version 2.78 booting

Bypassing firmware validation.

INIT: Entering runlevel: 3

Starting Fabric OS Services...
FIPS off, RRD...
Found 2(threshold 5) abnormal reboots within 3000 seconds window(threshold)


rscmon_service: started thread!

rscmon_service: started thread!

sys_chip_init: class 0 max 24 Done

ethsw_ha_enabled = 1

uptime: 4293889134; sup_qid: 0
.
2021/09/20-14:54:17, [HAM-1004], 31, CHASSIS, INFO, DS_6505B, Processor rebooted - Reset.






Fabric OS (DS_6505B)






DS_6505B console login: SNMP Research EMANATE/Lite Agent Version 16.2.0.9
Copyright 1989-2006 SNMP Research, Inc.
ki_state_set: redundant ACTIVATE for instance 1
All service instances on Active
2021/09/20-14:54:50, [EM-1050], 32, CHASSIS, INFO, DS_6505B, FRU Fan 2 removal detected.
POST1: Started running Mon Sep 20 14:54:51 GMT 2021
POST1: Test #1 - Running turboramtest
POST1: Script PASSED with exit status of 0 Mon Sep 20 14:55:10 GMT 2021 took (0:0:19)
POST2: Started running Mon Sep 20 14:55:12 GMT 2021
POST2: Test #1 - Running portloopbacktest (SERDES)
POST2: Running diagshow
POST2: Script PASSED with exit status of 0 Mon Sep 20 14:55:42 GMT 2021 took (0:0:30)
2021/09/20-14:55:44, [BL-1000], 33, CHASSIS, INFO, DS_6505B, Initializing ports...
2021/09/20-14:55:44, [BL-1001], 34, CHASSIS, INFO, DS_6505B, Port initialization completed.







Fabric OS (DS_6505B)






DS_6505B console login: admin

Password: 
Please change passwords for switch default accounts now.
Use Control-C to exit or press 'Enter' key to proceed.

Password was not changed. Will prompt again at next login
until password is changed.
DS_6505B:admin> firmwar3e eshow
Appl     Primary/Secondary Versions 
------------------------------------------
FOS      v7.0.1
         v7.0.1
DS_6505B:admin> ipaddrshow

SWITCH
Ethernet IP Address: none
Ethernet Subnetmask: 255.255.255.0
Gateway IP Address: none
DHCP: Off
DS_6505B:admin> licenseshow
No licenses installed.
DS_6505B:admin> chassisshow

FAN  Unit: 1
Fan Direction: Forward
Time Awake:            0 days

POWER SUPPLY  Unit: 1
Power Source: AC
Time Awake:            0 days

CHASSIS/WWN  Unit: 1
Header Version:        2
Power Usage (Watts): -31
Factory Part Num:      40-1000737-02
Factory Serial Num:    CCD2515H00N
Manufacture:            Day:  5  Month:  2  Year: 2012
Update:                Day: 10  Month:  4  Year: 2012
Time Alive:            0 days
Time Awake:            0 days
ID:            EMC0000CA
Part Num:      CONTRX0000650
Serial Num:    BRCCCD2515H00N

DS_6505B:admin>