Article number: pw_361-963

EAN: 4054783251339

Manufacturer: Motogadget

Manufacturer: Motogadget

Manufacturer number: 361-963

Description

Motogadget mo.unit blue, digital control box with 12 inputs and 10 outputs and control options via Bluetooth, Android (version 6.0 or higher), iOS version is compatible with iPhone 5 and higher

The new mo.unit blue has been further developed and significantly improved compared to the proven previous version. It now has 12 inputs and 10 outputs, quality interchangeable strain reliefs and best of all, Bluetooth® LE. This allows you to connect m.unit blue directly to our 'm.ride' app on your smartphone. This feature is unique in the motorcycle accessories industry.

The entire setup and alarm system can be controlled via the m.ride app. It is also possible to diagnose errors during operation and without removing the m drive. You can also use a secure and encrypted keyless entry feature.

If activated, approaching with your smartphone is sufficient to prepare the car for departure. In this way it is possible to activate the on-board voltage by pressing the start button. Another press then starts the engine. Once switched on, the on-board electrical system remains active safely while driving, even without a phone.

The m.unit blue is the digital motorcycle control unit, the heart of the entire vehicle electrical system. It can be operated with push button controls or with conventional toggle handlebar controls. It switches all necessary components on the vehicle and at the same time takes over the tasks of the electrical fuses.

Relays and individual components in the wiring harness are significantly reduced and the new minimized vehicle wiring can be done in the shortest possible time.

When using the m button, the number of all switch fitting connections is reduced to a single cable.

Functions WITHOUT smartphone and m.ride app

Full digital button control, possibility of 4 or 5 button operation

Complete replacement of the fuse box. 10 independent circuits are digitally monitored and shut down in the event of a fault. After the malfunction has been eliminated, the safety function is automatically restored

Integrated and location-independent alarm system

Integrated, digital, load-independent flasher relay, optional and adjustable automatic switch-off, selectable m.wave mode

Integrated emergency lights

Optionally adjustable indicator as position light

Integrated position light and flasher

Control of low beam and high beam (switching capacity up to 200 W) with a single button

Integrated digital brake light modulator, programmable flashing mode

Acceleration-controlled emergency brake light (automatic warning signal)

Integrated starter relay for starters with magnetic switch (switching capacity up to 30 A)

Intelligent and configurable control/shutdown of loads to be able to use the maximum inrush energy of the battery during the starting process

Integrated digital horn relay

Two additional configurable outputs AUX1 and AUX2

Diagnostic function for assigning input, output, circuit switching status, short circuit diagnosis, etc.

Calibration and current measurement enable fault detection of all light sources

Functions WITH smartphone and m.ride app

Encrypted connection via Bluetooth® LE (Low Energy), thus protection against manipulation

extremely low power consumption of smartphones and m.unit blue (with active Bluetooth 0.9 mA and in Powersave mode after 6 weeks of inactivity: 0.3 mA)

Keyless-Go (the vehicle is ready to go by approaching with your smartphone)

The highly sensitive acceleration sensor displays your riding activity in m.ride using an activity factor, number of turns, maximum speed, etc.

Transmission of alarm events to the app (with date, time, vehicle down, etc.)

Setting the mode and sensitivity of the alarm system

Current battery voltage monitoring in the app

Diagnosis of all inputs and outputs, measurement of currents, voltages, device temperature

Defect detection of all lamps by calibration. Faulty turn signals double flash frequency, status message in the app and audio notification from Rideassist.

Rideassist: Optional flashing sound and real-time error messages as audio output via helmet headset.

Manual switching of outputs via smartphone (except starter)

Firmware updates without removal anywhere via smartphone and app

Expansion-free setup menu setup at any place via smartphone and app

Vehicle management with automatic information on maintenance tasks, condition of tyres, chains, brake pads, oils, operating materials, spark plugs, etc. comparing vehicle mileage using a speedometer signal

The log records journeys and saves all vehicle-generated messages, alarm events and maintenance tasks

Parking location display and ping! to help you find a vehicle

LIN bus connection available for subsequent connection of suitable