Single phase bridge type thyristor controlled rectifier controlled rectifier module MT2DC-1-220V55A
Model: MT2DC-1-220V 55A
Current: 55A
Voltage: 220V
· Product size: length 114mm * width 76mm * height 46mm
Mounting hole center hole distance: 94mm
·Brand: Shanghai Jingjing
Current: 55A
Voltage: 220V
· Product size: length 114mm * width 76mm * height 46mm
Mounting hole center hole distance: 94mm
·Brand: Shanghai Jingjing
Features
·Modular technology, integrated with thyristor chip, thyristor phase shift control circuit, thyristor isolation driver module
·With power supply (simultaneous sampling), no need to add auxiliary power
● Module set 0-5V, 0-10V, 4-20mA three control signal input mode, can also be directly controlled by potentiometer
● There is an RC protection circuit inside the module, which can be used without an external RC. It is best to add a large current inductive load.
●With power LED indication, working status LED indication, intuitive and convenient to use
●Applicable to equipment for controlling resistive load, inductive load and capacitive load. The control signal terminal adopts pluggable/pullable terminals, which is convenient for regular maintenance of equipment.
● Phase shift control angle can be smoothly adjusted from 180 degrees to 0 degrees
· The module "OFF" is the forced off output signal control terminal. When the control voltage greater than 2.5V is applied, the output voltage is forcibly turned off. With the development of electronic technology, it can be connected with external control systems such as computer equipment to realize various intelligent control and host management, which is very suitable.
The control signal input terminal is completely isolated from the power supply terminal; the bottom plate is completely isolated from the control terminal and the main circuit; the isolation voltage is above 2500VAC, and the use is safe and reliable.
·Encapsulated with epoxy resin, it is effective against dust, moisture, corrosion and vibration.
● Modular design, strong anti-interference ability, easy to install
·Modular technology, integrated with thyristor chip, thyristor phase shift control circuit, thyristor isolation driver module
·With power supply (simultaneous sampling), no need to add auxiliary power
● Module set 0-5V, 0-10V, 4-20mA three control signal input mode, can also be directly controlled by potentiometer
● There is an RC protection circuit inside the module, which can be used without an external RC. It is best to add a large current inductive load.
●With power LED indication, working status LED indication, intuitive and convenient to use
●Applicable to equipment for controlling resistive load, inductive load and capacitive load. The control signal terminal adopts pluggable/pullable terminals, which is convenient for regular maintenance of equipment.
● Phase shift control angle can be smoothly adjusted from 180 degrees to 0 degrees
· The module "OFF" is the forced off output signal control terminal. When the control voltage greater than 2.5V is applied, the output voltage is forcibly turned off. With the development of electronic technology, it can be connected with external control systems such as computer equipment to realize various intelligent control and host management, which is very suitable.
The control signal input terminal is completely isolated from the power supply terminal; the bottom plate is completely isolated from the control terminal and the main circuit; the isolation voltage is above 2500VAC, and the use is safe and reliable.
·Encapsulated with epoxy resin, it is effective against dust, moisture, corrosion and vibration.
● Modular design, strong anti-interference ability, easy to install
Application range
● Temperature control of heating elements such as nickel-chromium, iron-chromium-aluminum, far-infrared heating elements, silicon molybdenum rods, and silicon carbon rods.
●Charging equipment control, switching power supply or variable frequency power supply front stage voltage regulation, adjustable DC power supply control
·Motor excitation control, electromagnet control, DC motor speed regulation, etc.
● Temperature control of heating elements such as nickel-chromium, iron-chromium-aluminum, far-infrared heating elements, silicon molybdenum rods, and silicon carbon rods.
●Charging equipment control, switching power supply or variable frequency power supply front stage voltage regulation, adjustable DC power supply control
·Motor excitation control, electromagnet control, DC motor speed regulation, etc.
The main parameters
·Working power supply:
110V, 220V, 380V third gear, other can be customized, 110V gear input voltage is 90-130VAC;
220V gear input voltage is 160-260VAC; 380V gear input voltage is 350-420VAC
● Voltage adjustment range: 0-100%, current adjustment range: 0-100%,
· Phase shift range: 0-180 degrees,
● Input control signal mode:
Integrated with 0-5V, 0-10V, 4-20mA three control signal input modes, users can choose according to their own needs, and can directly connect a 10K potentiometer for control
·Working frequency: 47-60HZ
●Working environment: temperature is -25 to 75 degrees, maximum relative humidity is 90%
●Insulation voltage: 2500VAC
●Dimensions: length 114* width 76* height 46 (mm)
·Working power supply:
110V, 220V, 380V third gear, other can be customized, 110V gear input voltage is 90-130VAC;
220V gear input voltage is 160-260VAC; 380V gear input voltage is 350-420VAC
● Voltage adjustment range: 0-100%, current adjustment range: 0-100%,
· Phase shift range: 0-180 degrees,
● Input control signal mode:
Integrated with 0-5V, 0-10V, 4-20mA three control signal input modes, users can choose according to their own needs, and can directly connect a 10K potentiometer for control
·Working frequency: 47-60HZ
●Working environment: temperature is -25 to 75 degrees, maximum relative humidity is 90%
●Insulation voltage: 2500VAC
●Dimensions: length 114* width 76* height 46 (mm)
Note: There are phase requirements
The solution is very simple. You can start without the entanglement of the phase problem. After the drive output is connected to the power supply and other application circuits, check the wiring and connect the power supply, and then the “0-5V” end of the control signal input terminal. The +5V" terminal is short-circuited. After the working indicator is on, the output voltage is the maximum (to be connected to a load, or a bulb can be connected as a load), the phase is correct; if the "0-5V" end and the "+5V" end If there is no output voltage or the voltage is short, it means the phase is wrong. You can adjust the input of the power supply (and synchronization signal) on the module.
The solution is very simple. You can start without the entanglement of the phase problem. After the drive output is connected to the power supply and other application circuits, check the wiring and connect the power supply, and then the “0-5V” end of the control signal input terminal. The +5V" terminal is short-circuited. After the working indicator is on, the output voltage is the maximum (to be connected to a load, or a bulb can be connected as a load), the phase is correct; if the "0-5V" end and the "+5V" end If there is no output voltage or the voltage is short, it means the phase is wrong. You can adjust the input of the power supply (and synchronization signal) on the module.
Quantity: 1pc
Warranty: 120 day
Warranty: 120 day
