CNC Closed Loop Stepper Motor Servo Driver Kit Nema 34 Nema 23 0.4Nm-12Nm 24-80V
Packing List
1 x Motor & Driver
1 x 3M Encoder cable
1x 3M Power cord
HB808C HB860H Digital Hybrid Servo Driver
1Advantages
A. Digital Hybrid Servo Driver adopts the latest DSP digital processing chip and advanced control algorithm technology of
variable current and frequency conversion, and is a manufacturer of equipment.
B. A cost-effective hybrid servo drive solution is provided. It is compact and space-saving.
C. It reduces the electromagnetic interference between wires, adopts better vibration technology and low heating technology,
and effectively solves the problems of motor and driver.
D. Fever, vibration and noise problems, and low fever, green environmental protection.
F.Note:Torque 0.4Nm-3.5Nm motor matched with HB808C driver, torque 4.0Nm-12.5Nm motor mathed with HB860H.
2. Features
- A. Operating Voltage: DC Input Voltage 24VDC-80VDC,
- B. Recommended Operating Voltage 36V/48V
- C. Maximum continuous output current:8.0 A,maximum peak current:13A
- D. Acceptable differential and single-ended pulse/direction instructions, with three control modes of position/speed/moment
- FOC magnetic field positioning control technology and space vector pulse width modulation (SVPWM) closed-loop control
- technology Adopting advanced technology of converting current and frequency conversion, the heating of motor and driver is
- effectively reduced.
- E. The number of pulses per cycle can be set (subdivided) by debugging software or dialing.
- F. Over-voltage, under-voltage, over-current and over-difference protection functions Single/double pulse mode and effective
- pulse edge are optional (through serial port to connect upper computer selection) Maximum pulse frequency of control
- instruction is 500 KHz (default is 200 KHz).
- G. Pulse, Direction and Enabling Signal Input Interface Level is 4.5-28V Compatible.
- H. Has the serial port RS232 debugging function, but needs to use the company's special serial port debugging cable.
3.Applications
Digital Hybrid Servo Driver is suitable for all kinds of small and medium-sized automation equipment and instruments,
such as: screw locking machine, stripper, winding machine, terminal machine, laser machine, spray painting machine,
small and medium-sized engraving machine, electronic processing equipment, automatic grasping equipment, special
numerical control machine tools, packaging equipment and robots. The application effect is better in the equipment with
low noise and high speed expected by users.
4.HB808C Hybrid Servo Driver Specification
5.HBS86H Hybrid Servo Driver Specification
NEMA 17(42mm) series motor technical parameters
Rated Current/phase: 1.5 A
Frame Size: 40 x 40mm
Shaft Diameter: 8mm
Shaft Length: 24mm
Phases:2PH
Step Angle:1.8°
Pin Count:4+6
NEMA 23(57mm) series motor technical parameters
Frame Size: 57 x 57mm
Shaft Diameter: 8mm
Shaft Length: 21mm
Phases:2PH
Step Angle:1.8°
Pin Count:4+6
NEMA 24(60mm) series motor technical parameters
Frame Size: 60 x 60mm
Shaft Diameter: 8mm
Shaft Length: 25mm
Phases:2PH
Step Angle:1.8°
Pin Count:4+6
NEMA 34(86mm) series motor technical parameters
Frame Size: 86 x 86mm
Shaft Diameter: 14mm
Shaft Length: 34mm
Phases:2PH
Step Angle:1.8°
Pin Count:4+6
| Model | Flange | holding torque | rated current | phase resistance | Phase inductance | pin count | rotational inertia | Motor length | weight |
| NEMA | N.M | A/PH | Ω/ph | mH/PH | PINS | g.cm^2 | (L)mm | kg | |
| 42HB250-40B | NEMA 17 (40mm) | 0.4 | 1.5 | 0.43 | 2.6 | 4+6 | 57 | 60 | 0.43 |
| 42BHB250-48B | NEMA 17 (40mm) | 0.52 | 1.5 | 0.5 | 4.6 | 4+6 | 82 | 68 | 0.5 |
| 42BHB250-60B | NEMA 17 (40mm) | 0.68 | 1.5 | 0.65 | 5.8 | 4+6 | 110 | 80 | 0.62 |
| 57HB250-54B | NEMA 23 (57mm) | 1.5 | 3 | 0.93 | 3.5 | 4+6 | 300 | 75 | 0.75 |
| 57HB250-80B | NEMA 23 (57mm) | 2.2 | 3.5 | 0.4 | 1.55 | 4+6 | 450 | 97 | 1.1 |
| 57HB250-100B | NEMA 23 (57mm) | 3.2 | 4.5 | 0.5 | 2.4 | 4+6 | 680 | 123 | 1.56 |
| 57HB250-112B | NEMA 23 (57mm) | 3.5 | 4.5 | 0.78 | 3.6 | 4+6 | 760 | 132 | 1.78 |
| 57HB250-80S brake | NEMA 23 (57mm) | 2.2 | 3.5 | 0.4 | 1.55 | 1.5 | 450 | 136 | 1.6 |
| 57HB250-100S brake | NEMA 23 (57mm) | 3.2 | 4.5 | 0.5 | 2.4 | 1.5 | 680 | 162 | 2.06 |
| 60HB250-78B | NEMA 24 (60mm) | 3 | 3.5 | 0.56 | 1.1 | 4+6 | 620 | 104 | 1.1 |
| 60HB250-88B | NEMA 24 (60mm) | 3.5 | 4 | 0.5 | 1.3 | 4+6 | 840 | 110 | 1.29 |
| 86HB250-80B | NEMA 34 (86mm) | 4.5 | 4 | 0.42 | 2.4 | 4+6 | 1400 | 106 | 2.8 |
| 86HB250-118B | NEMA 34 (86mm) | 8.5 | 5 | 0.7 | 7.3 | 4+6 | 3200 | 144 | 4.5 |
| 86HB250-156B | NEMA 34 (86mm) | 12.5 | 6 | 0.69 | 7.2 | 4+6 | 4000 | 176 | 5.9 |
