TYPE-C 20W High Power Fast Charging Wireless Charger Transmitter Module 0-8MM

Popular

    Product Introduction

    Product selling points:
    1: The temperature during charging is 5-10℃ lower than similar solutions
    2: Built-in MCU and charging management IC chip
    3: Wiring is simple to use
    4: Product certification: CE/FCC/RoHS
    5: Safe fast charge with 6 protections, over current protection, over voltage protection, over temperature protection, over power protection, under voltage protection, short circuit protection
     
    Purchase instructions Wireless charging = transmitter + receiver
    1. The mobile phone "has" wireless charging function: if your mobile phone has wireless charging function, or you have purchased the "receiving terminal"
    Then just buy the "transmitter (base)" to charge.
    2. The mobile phone "does not have" wireless charging function: if your mobile phone does not have a "receiving end (coil patch)", then you have to buy it
    "Transmitting terminal + receiving terminal" can be charged.
     
    Input power: Type-C port: 5v/9V/12V or QC3.0; welding wire: 8V-13.5V
    Transmission distance: Spacer (O-8mm), Max: 10mm / Spacer (0-10mm), Max: 14mm
    Charging power: 5W/7.5W/1oW/15W/20W automatic identification
    Coil size: diameter 50mm; thickness 2.2mm
    Circuit board size: 35mm*35mm; thickness 3.1mm
    Executive standard: Qi wireless charging standard
    Product certification: CE/FCC/RoHS
     
    (Note: If there is no wireless charging function, the receiver needs to be added) Support 5W charging
     
    Checklist:
    1*Wireless fast charging module
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    TYPE-C 20W High Power Fast Charging Wireless Charger Transmitter Module 0-8MM

    Product Introduction

    Product selling points:
    1: The temperature during charging is 5-10℃ lower than similar solutions
    2: Built-in MCU and charging management IC chip
    3: Wiring is simple to use
    4: Product certification: CE/FCC/RoHS
    5: Safe fast charge with 6 protections, over current protection, over voltage protection, over temperature protection, over power protection, under voltage protection, short circuit protection
     
    Purchase instructions Wireless charging = transmitter + receiver
    1. The mobile phone "has" wireless charging function: if your mobile phone has wireless charging function, or you have purchased the "receiving terminal"
    Then just buy the "transmitter (base)" to charge.
    2. The mobile phone "does not have" wireless charging function: if your mobile phone does not have a "receiving end (coil patch)", then you have to buy it
    "Transmitting terminal + receiving terminal" can be charged.
     
    Input power: Type-C port: 5v/9V/12V or QC3.0; welding wire: 8V-13.5V
    Transmission distance: Spacer (O-8mm), Max: 10mm / Spacer (0-10mm), Max: 14mm
    Charging power: 5W/7.5W/1oW/15W/20W automatic identification
    Coil size: diameter 50mm; thickness 2.2mm
    Circuit board size: 35mm*35mm; thickness 3.1mm
    Executive standard: Qi wireless charging standard
    Product certification: CE/FCC/RoHS
     
    (Note: If there is no wireless charging function, the receiver needs to be added) Support 5W charging
     
    Checklist:
    1*Wireless fast charging module
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    DataCaciques