KEY DIGITAL KD-X422POA
4K POH/HDBaseT/HDMI with Audio De-Embedder Extenders (TX/RX KIT)
Key Features:
- HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic
adjustment of feedback, equalization, and amplification depending on
cabling length
- Power Over HDBaseT: Features power extension from Tx to Rx with Power Over
HDBaseT, Rx unit does not require power supply
- Audio De-Embedding: Audio from the HDMI input is de-embedded through
Analog L/R Balanced/Unbalanced and Digital Coaxial Audio (PCM) audio outputs to
enable external audio connectivity with audio distribution systems and amplifiers
- Signal Extension:
- Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using CAT6A cabling
- Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6
UTP/STP cabling
- Up to 250 ft. @ 1080p / 1920x1200 using CAT6A cabling
- Up to 230 ft. @ 1080p / 1920x1200 using third-party CAT5e/6 cabling
- HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
- HDR10 (High Dynamic Range): More life-like images through a greater range
of luminance levels
- 4K/UHD Resolution: Supports signals up to 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz [4:2:2] 12bit, and 4096x2160 30Hz [4:4:4] 8bit
- Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
- 3D: Support for standard 3D stereoscopic signal formats
- HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2
and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
- EDID Control: Internal library features 15 default EDID configurations and
native EDID data from Output/Display devices connected via Rx
- Hot Plug Detection Control: Enables integrator to choose if active signal voltage
is forced to connected input devices
- Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP
authentication with source & display, EDID Control handshake, and Hot Plug control
- Low Profile: Super slim chassis design
- IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight
IR from remote(s) without external IR connecting block
- Up/Down IR: Two channels of IR enable control to/from devices connected
to Tx and Rx units
- RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
- Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as
connectivity status
- Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus,
Dolby Atmos®, and DTS-HD Master Audio™
- CEC Support: For inter-device control between input and output HDMI channel
- I2C Communication: EDID and HDCP authentication to Display and Source
- Control System Support