8 Port PoE Smart Managed Switch Netgear GS110TPv2

Eingebaut in einem robusten pulverbeschichteten Stahlblechgehäuse (400x300x120mm)
Staubdicht mit Schutz gegen starkes Strahlwasser IP66

8 Stk. RJ45-Port 1Gbps
2 Stk. SFP-Port 2Gbps  
11Stk.  Kunstoffkabelverschraubungen Klemmbereich 7-13mm
inkl. Befestignungsmaterial

- Ideal für rauhe Umgebungen wie Industriehallen, landwirtschaftliche Stallungen etc
- günstiger Ersatz für einen industrial Switch.

Hinweis:
Beim GS110TP gibt es verschiedene Versionen. Es handelt sich hier um die Version 2.
Der Unterschied zu Version 3 liegt in der max. PoE Leistung.
Version 2 kann 15,4W/Port liefern
Version 3 kann 30W/Port liefern

Technical Specifications
Network Protocol and Standards Compatibility
– IEEE 802.3i 10BASE-T
– IEEE 802.3u 100BASE-TX
– IEEE 802.3ab 1000BASE-T
– IEEE 802.3z 1000BASE-X
– IEEE 802.3x full-duplex flow control
– IEEE 802.3af (DTE Power Via MDI)
Power Supply
– Power consumption: 59.3W maximum
Network Ports
– Eight (8) 10/100/1000 Mbps auto-sensing + 2 Gigabit SFP uplinks
Physical Specifications
– Dimensions: (W x D x H): 236 x 101.6 x 27 mm (9.3 x 4 x 1.07 in)
– Weight: 0.7 kg (1.55 lb)
Performance Specifications
– Forwarding modes: Store-and-forward
– Bandwidth: 20 Gbps full duplex
– Network latency: Less than 4 μs for 64-byte frames in store-and-forward mode for 1000 Mbps to 1000 Mbps transmission
– Buffer memory: 512 KB embedded memory per unit
– Address database size: 4k media access control (MAC) addresses per system
– Mean time between failures (MTBF):157,004 hours (~18 years)
– Acoustic noise: 0 dB
Electromagnetic Emissions
– CE mark, commercial
– FCC Part 15 Class B
– VCCI Class B
– C-Tick
Environmental Specifications
– Operating temperature: 32° to 122° F (0° to 50° C)
– Storage temperature: -4° to 158° F (-20° to 70° C)
– Operating humidity: 90% maximum relative humidity, non-condensing
– Storage humidity: 95% maximum relative humidity, non-condensing
– Operating altitude: 10,000 ft (3,000 m) maximum
– Storage altitude: 10,000 ft (3,000 m) maximum
Status LEDs
– Per RJ45 port: Link/activity, speed, PoE status
– Per SFP port: Link/speed
– Per device: Power, PoE Max