1/2" to 3/8" High Angle Misalignment Top Hat Reducers
(Pack of 10)
Part # HAT8-6(QTY:4) - 1/2" to 3/8" Top Hat Reducers (Pair)
McGill reducers are manufactured to be within excellent tolerances. These are commonly used for motorsport when using rod ends in suspension systems.
These steel 1/2" to 3/8" Rose Joint Size Reducers/Top Hat Spacers reduce the standard 1/2" hole in rose joints/reod ends to a 3/8" size. Ideal for shock absorbers.
Hole Bore : 0.375 " (3/8")
Outside Diameter Section : 0.657 " ( 16.7 mm" )
Height that protrudes from the rose joint/rod end when installed : 0.224" (5.7 mm).
HANDY HINT: When you have two of these installed in either side of a rose joint/rod end, the minimum bracket width to accept this configuration you need is 1.076" (27.32 mm)
When you have two of these installed in either side of a COM8 bearing the minimum bracket width to accept this configuration is 0.943" (23.96mm)
DIMS | HAT8-6 | HAT8-6(THIN) |
Bore | 9.4mm (0.379) | 9.4mm (0.379) |
A | 12.6mm (0.496) | 10mm (0.393) |
B | 5.7mm (0.224) | 4.3mm (0.169 |
C | 6.5mm (0.255) | 5mm (0.196) |
D | 16.7mm (0.657) | 15.9mm (0.625) |
E | 3.5mm (0.137) | 3.1mm (0.122) |
F | 12.7mm (0.5) | 12.7mm (0.5) |
G | 1.5mm (0.059) | 1.5mm (0.059) |