METAL EPOXY GLUE FOR STEEL IRON BRONZE BRASS LIQUID METAL 2x20ml
Epoxy Glue Metal is a two-part adhesive and filler ideal for metals, alloys and castings. Once cured, can be painted, drilled, sanded, threaded or filed. Resists water, solvent and most automotive fluids.
Beige colour
Lifetime after mixing: 30 minutes
Pre-curing: 135 min. (at 200C)
Total hardening: 24 h
Shear strength: 10.0 MPa
Temperature range: -30C to 90C
Shelf life: 36 months
Features
< >Doesn't contain solventsResistant to water and temperatureResistant to aggressive chemical agentsHigh electrical puncture resistanceAfter drying it can be machined mechanically (grinding, drilling, threading)Application
< >gluing broken plastic bumpers, covers, switchboardsgluing profiles and boards for plasticsfilling cavities in concrete, natural stonesticking decorative strips made of wood, polystyrene, hard PVCmaking chemically resistant joints, eg in tables, laboratory floorsHow to use
< >The bonding surfaces should be mechanically cleaned and roughed (sandblasting, grinding, sandpaper, file).Remove any dirt and degrease (use Cleaning Kit P-102 or Technicqll Degreaser P-959).Squeeze the right amount of ingredients "A" and "B" in a 1: 1 volume ratio and mix thoroughly until a uniform colour is obtained.Apply the prepared mixture on one of the surfaces.The elements squeeze firmly and leave immobilized until the glue is fully cured.Epoxy Glue Metal is a two-part adhesive and filler ideal for metals, alloys and castings. Once cured, can be painted, drilled, sanded, threaded or filed. Resists water, solvent and most automotive fluids.
< >Beige colourLifetime after mixing: 30 minutesPre-curing: 135 min. (at 200C)Total hardening: 24 hShear strength: 10.0 MPaTemperature range: -30C to 90CShelf life: 36 monthsFeatures
< >Doesn't contain solventsResistant to water and temperatureResistant to aggressive chemical agentsHigh electrical puncture resistanceAfter drying it can be machined mechanically (grinding, drilling, threading)Application
< >gluing broken plastic bumpers, covers, switchboardsgluing profiles and boards for plasticsfilling cavities in concrete, natural stonesticking decorative strips made of wood, polystyrene, hard PVCmaking chemically resistant joints, eg in tables, laboratory floorsHow to use
The bonding surfaces should be mechanically cleaned and roughed (sandblasting, grinding, sandpaper, file).
Remove any dirt and degrease (use Cleaning Kit P-102 or Technicqll Degreaser P-959).
Squeeze the right amount of ingredients "A" and "B" in a 1: 1 volume ratio and mix thoroughly until a uniform colour is obtained.
Apply the prepared mixture on one of the surfaces.
The elements squeeze firmly and leave immobilized until the glue is fully cured.