※ Features:

The structure is simple, the manufacturing and installation accuracy is not high, the use and maintenance are convenient, and it is suitable for occasions with a large center distance between two shafts.

The transmission is stable, the noise is low, and it has a buffer and vibration absorption effect.

When overloaded, the transmission belt will slip on the pulley, which can prevent the damage of weak parts and play a safety protection role.

Application areas: automotive (car installation), industry, household appliances (washing machine equipment), agricultural equipment (agricultural machinery installation), etc.

---

Special Note:

Installation instructions: When installing the belt, you should loosen one side of the sheave first, adjust it to a position where the belt can be easily loaded, and then tension the belt easily (the first time the belt is installed, the belt should be tensioned as much as possible, and run for 24 hours (It needs to be tensioned once, and there is no need to adjust it later)

Do not use tools to forcibly pry into the belt or use the pulley to force the belt into the belt. Forcibly installing the belt will damage the belt's strong layer and make the belt unable to be used normally. Calibrate the parallelism of the shaft and pulley while tensioning the belt

---

 

Base length:

When the V-belt rotates and bends around the pulley, the layer whose length and width remain unchanged is called the neutral layer. Under the specified tension, the circumference measured along the neutral layer of the triangular belt is called the reference length Ld, also called the nominal length. It is mainly used to calculate the geometric size of the belt drive and mark the triangle belt, and its length has been standardized.

Dimensional error information: When manufacturing parts, to make them interchangeable, the parts should be within the specified maximum and minimum limits. The permissible size variation is: tolerance, but they all fall within the scope of the industry regulations. Contact online customer service for information on specific tolerances. When the product is ordered, the tolerance is accepted by default.