1.For the first time use. please pull out the plastic separator at the battery holder.
2. Switch ON Remote Control Mode in your camera prior to use the remote. Please refer camera manual for more details.
3.Press the button and rotate main command dial until(delayed remote) or(quick response remote)is displayed in the control panel.
4.Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/-30 degree of the lens axis, from the left to the right and from the top to the bosom) and press the shutter-release button on the remote control (when using the remote outdoors,make sure that the subject is not backlit and that the line of site between the transmitter and the infrared receiver is not blocked by the lens or other obstacles).
5.How the camera focuses and shoots depends on the option selected camera's custom setting.For further information check your camera's manual
6.Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.