MR CARTOOL F118 Brake Fluid Bleeder is a power steering fluid exchanger equipment, used to empty and refill brake fluid in the brake and clutch equipment of cars. Compared with the traditional compression brake fluid bleeding device, the pulsating electric brake oil exchanger brake bleeder can effectively avoid the formation of bubbles in the process of adding brake fluid, so as to optimize and avoid the artificial exhaust process. |
One-button Fluid Exchange Our brake brake bleeding kit can replace the oil with one button. The entire replacement process is automatic and easy to use, allowing you to easily use and change the brake oil. | Two Pressure Modes This brake bleeder fluid exchanger is available in standard & master modes. Please select either mode before starting the fluid exchange. (Standard Mode: 1.5-2.0 bar; Fast Mode: 2.0-2.5 bar). | Two Types of Power Supply This brake bleeder fluid exchanger can both support 12V battery and 220V socket supply. |
Portable Design The bleeder made of high quality aluminum alloy prevent to rust. Humanized handle design, spacious rear base position for easy bottle storage and side hooks for easy organization of hose. | The Preparation of Bleeding Air During the brake fluid exchanging, air should be prevented from mixing into the vehicle through the equipment line, otherwise it could lead to failure.It is necessary to fill the line with brake fluid to completely bleed air out for the first time using. | Filling Bottle & Recycle Bottle Equipped with two bottles. Filling Bottle: For storingnew brake fluidwith 1L capacity Recycling Bottle: For recyclingused brake fluid. |
Compatible with most vehicles Adapter #1 Compatible with Mercedes-Benz, for BMW, for Volkswagen, for Audi, for Skoda, for Volvo, for Land Rover, for BYD, for Jaguar, for Porsche, for Buick, for Ford, for Citroen, for Chevrolet, for PEUGEOT, for Chery, for Changan, for Changan Mazda, for Great Wall Motor, for FAW Haima Automobile, Roewe, for MG, for Renault, for Geely, for ZHONGHUA, for Pentium, for Lexus, for GAC Trumpchi, for QOROS, etc. Adapter #2 Compatible with JAC, for Hyundai, for Subaru, for Roewe 550, for Renault, for Dongfeng-Yueda Kia Series, for Mitsubishi, for Infiniti, for BAIC BJEV, etc. Adapter #3 Compatible with Buick Business Series Adapter #5 Compatible with Honda, for BYD Series Adapter #6 Compatible with Toyota, for KING LONG School Bus Series Adapter #8 Compatible with Dodge, for Chrysler, for JEEP Series Adapter #10 Compatible with Nissan Series |
Specification: Power Supply: DC 12V battery Working Voltage: 220-240V 50/60Hz Maximum Flow: 1.2 L/min Maximum Power: 35W Working Pressure: 0~3 bar Noise: ≤70dB Weight: 16.33 pounds (7.41 kg) Fluid shortage protection: Yes Container empty protection: Yes Filling Hose Length: 3.5m (137.8 inches / 11.48 ft) Dimension: 255 x 220 x 360 mm | Package include: 1 x Brake bleeder machine 1 x 12V power cable 1 x 220V Plug 1 x Voltage converter transformer 7 x Adapters 1 x Recycling bottle 1 x Filling bottle 1 x User manual 1 x Package box |
How to adjust working pressure correctly: When the device is out of factory, the working pressure of the pressure regulator is set to 1~1.5 bar, to ensure that the liquid storage chamber does not deform while changing liquid, thereby ensuring the tightness of the secondary sealing ring. In addition, it is also feasible to exhaust or change the liquid at a lower working pressure by adjusting the pressure and the size switch. In special circumstances, while operating under a higher working pressure, be aware of the excessive pressure adjustment, which may damage the brake master cylinder of the brake system. |