Specifications:
Material: ABS
Remote-controlled Distance: Approx.(300m) 984ft without obstacles
Battery Receiver: 2 x AAA Lithium Batteries (Included)
Remote Control: 2 x 4LR44 6V Batteries (Included)
Training Mode: Shock, Vibrate, Lights and Beeps
Features:
1. Up to (300m)984ft barrier free remote control range with a high sensitivity receiver for pet to receive signal.
2. One remote can pair with max 2 receivers, but we only include one receiver.
3. Training modes and adjustable level helps to correct misbehavior of your pet, rewards training can have better effect.
4. You can set 4 different channels by adjusting the level of shock mode and Vibration mode from 0-100 to select the intensity of training.
5. Save energy, about 2 minutes the remote will automatically into the sleep state if not use, press any key (except the flashlight button) to wake up.
6. There's a back buckle on the remote, can be carried around, hanging on the waist bag.
7. The red indicator light of the remote will flash when working.
How to use the Receiver:
1. Install the batteries, red light will be on. Press the Y key of the remote control in 10 seconds to complete the code pairing. Reinstall the batteries and repeat the above work if you do not press Y key in 10 seconds.
2. When code pairing, the screen show 1 means pairing channel 1, the screen show 2 means pairing channel 2. When using, please choose according to the channel that has been paired.
3. Receiver off: When standby, red indicator light flashes once for 4 seconds, take out the battery and it will be off.
4. Save energy, about 5 minutes the receiver will automatically into the sleep state if not use.
5. When wearing the receiver, dogs stand best. Because sitting may cause the receiver doesn't close to the dog skin. Receiver should put under the dog's neck. Adjust the dog collar to be able to reach into a finger for better effect.
6. Some pets will be upset when first time use, please allow the pets to have time to adapt, do not enable the shock function before the pets has adapted.
How to Test the Functions:
1.When test the functions, please do not wearing it on your pets.
2.Set the vibration and shock parameters of the remote control to the highest, and turn on the receiver.
3.When test the Vibration function,Set the remote control to vibrate mode, press Y key,then the receiver will vibrate.
4. When test the Electric Shock function,place the test lamp diode on the shock contact,Set the remote control to shock mode, press Y key , then the test lamp diode will bright.
5.If the above phenomenon does not appear during the test, the remote control and receiver may not pair code successfully or tune to the correct channel, please recheck the code pairing.
5. If shock or vibration function cannot be used normally after successfully pairing codes, please check whether the intensity position is 0.
Notes:
* Professional training is highly recommended if your dogs have difficulties in dog training.
* Due to lighting and screen settings, the actual color may slightly differ from the picture.
* Allow slight dimensional differences due to manual measurements.
Package Includes:
1 * Remote Control (Batteries are Included)
1 * Collar Receiver (Batteries are Included)
1 * Adjustable Belt
(Others are NOT included)