Revo Voron HeatSink - E3D
Smaller, lighter, redder. Say hello to the Revo Voron - the HotEnd of choice for Voron 3D printers.
This heat sink is made from machined aluminum and is covered in a red anodized finish to complement the Voron accented parts.
Rigidly mount it to your Voron 3D printer and add compatibility with the Revo ecosystem. With a Revo HeaterCore and Revo Nozzles (sold separately) you can change nozzles without the hassle of tools and hot tightening!
For technical specifications, please visit the wiki dedicated to E3D products: https://e3d-online.zendesk.com/hc/en-us Here you can find technical details and installation examples. To share opinions and questions, including technical ones, you can consult the dedicated forum: https://forum.e3d-online.com/
The object you will receive may differ in some characteristics from the one shown in the photo, depending on the production lot. Despite this, the functionality is maintained.
MULTIPLE ORDERS
For the purchase of multiple items is possible ask the seller for the total. In the event that we do not receive any requests, and the sum of the shipments calculated automatically by eBay is therefore paid, there will be no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested SINCE the purchase, reporting all the necessary data (with eBay message or PayPal note).
If you don't request it, the transaction will be recorded at the end of the day in our pay register. It will therefore no longer be possible to request the commercial invoice relating to the order.
This is why we take care of your order right from the packaging, delivering it to the shipper within 24 working hours following payment (in most cases).
Are available:
- Mail 1 economic service: delivery takes place on average in 2/6 working days (excluding remote areas). Being an economic service (without full tracking) there may be delays that cannot be managed by us.
IF YOU RECEIVE AN ITEM NOT CONFORMING TO THE DESCRIPTION, NOT CORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide the consumer with a period of 14 days to withdraw from the distance contract (according to the provisions of Legislative Decree 21/2014 which transposed Directive 83/2011/EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of made-to-measure or personalized goods and the supply of sealed electronic material.
Before the withdrawal period has expired, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is lost completely: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage to the original packaging. In the presence of one of the above conditions, no refund or exchange of goods will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also address schools that are considering expanding their training offer by renovating electronics laboratories or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guide projects and implementation support.
We offer the ELECTRONIC INVOICING service for Public Administrations.
We are also present on the acquistiinretepa.it (MePA) portal.
Revo Voron HeatSink - E3D
Smaller, lighter, redder. Say hello to the Revo Voron - the HotEnd of choice for Voron 3D printers.
This heat sink is made from machined aluminum and is covered in a red anodized finish to complement the Voron accented parts.
Rigidly mount it to your Voron 3D printer and add compatibility with the Revo ecosystem. With a Revo HeaterCore and Revo Nozzles (sold separately) you can change nozzles without the hassle of tools and hot tightening!
For technical specifications, please visit the wiki dedicated to E3D products: https://e3d-online.zendesk.com/hc/en-us Here you can find technical details and installation examples. To share opinions and questions, including technical ones, you can consult the dedicated forum: https://forum.e3d-online.com/
The object you will receive may differ in some characteristics from the one shown in the photo, depending on the production lot. Despite this, the functionality is maintained.
MULTIPLE ORDERS
For the purchase of multiple items is possible ask the seller for the total. In the event that we do not receive any requests, and the sum of the shipments calculated automatically by eBay is therefore paid, there will be no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested SINCE the purchase, reporting all the necessary data (with eBay message or PayPal note).
If you don't request it, the transaction will be recorded at the end of the day in our pay register. It will therefore no longer be possible to request the commercial invoice relating to the order.
This is why we take care of your order right from the packaging, delivering it to the shipper within 24 working hours following payment (in most cases).
Are available:
- Mail 1 economic service: delivery takes place on average in 2/6 working days (excluding remote areas). Being an economic service (without full tracking) there may be delays that cannot be managed by us.
IF YOU RECEIVE AN ITEM NOT CONFORMING TO THE DESCRIPTION, NOT CORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide the consumer with a period of 14 days to withdraw from the distance contract (according to the provisions of Legislative Decree 21/2014 which transposed Directive 83/2011/EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of made-to-measure or personalized goods and the supply of sealed electronic material.
Before the withdrawal period has expired, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is lost completely: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage to the original packaging. In the presence of one of the above conditions, no refund or exchange of goods will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also address schools that are considering expanding their training offer by renovating electronics laboratories or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guide projects and implementation support.
We offer the ELECTRONIC INVOICING service for Public Administrations.
We are also present on the acquistiinretepa.it (MePA) portal.
Listing created with Store360