Product model: 2323 10SMD super bright LED light source LED fog lamp front fog lamp Headlight light
Features:
1. New super bright 3570 LED bulb
2. Easy to install, install it into your wiring harness socket.
3. The bulbs are non-polar, so you only need to insert them.
4. No need to modify or transform your tractor.
5. Super bright, longer duration, less voltage used by the bulb, and will not melt your lens if left for too long.
Light bulb highlights:
1. The light beam angle is 360 degrees,
2. Steel base and alloy body.
3. One of the brightest bulbs in its class; more than 2500 lumens each!
4. It is the front projection that makes them so effective. The 3570 LED is better designed than other bulbs.
product features:
Adopt South Korea imported light source: 2323SMD
Number of lamp beads: 10SMD
Working voltage: 12v
Life: 50000 hours
Specifications:
Light Angle:360°
Color Temperature: 6000K
Material:Aluminium alloy
Emitter Type:LED
Rated Voltage:12V DC
·It can be used as a modified fog lamp for many car models to indicate the brightness;
·The model is the same as the original car, directly replace the original car glass bulb;
·No filament structure, no heat, and the vehicle control circuit is not easy to oxidize;
·High luminous purity, DIY in various colors, highlighting personalized lighting;
·Cold light source, comfortable, low power consumption, belongs to green light source.
Install Caution：
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Features:
1. New super bright 3570 LED bulb
2. Easy to install, install it into your wiring harness socket.
3. The bulbs are non-polar, so you only need to insert them.
4. No need to modify or transform your tractor.
5. Super bright, longer duration, less voltage used by the bulb, and will not melt your lens if left for too long.
Light bulb highlights:
1. The light beam angle is 360 degrees,
2. Steel base and alloy body.
3. One of the brightest bulbs in its class; more than 2500 lumens each!
4. It is the front projection that makes them so effective. The 3570 LED is better designed than other bulbs.
product features:
Adopt South Korea imported light source: 2323SMD
Number of lamp beads: 10SMD
Working voltage: 12v
Life: 50000 hours
Specifications:
Light Angle:360°
Color Temperature: 6000K
Material:Aluminium alloy
Emitter Type:LED
Rated Voltage:12V DC
·It can be used as a modified fog lamp for many car models to indicate the brightness;
·The model is the same as the original car, directly replace the original car glass bulb;
·No filament structure, no heat, and the vehicle control circuit is not easy to oxidize;
·High luminous purity, DIY in various colors, highlighting personalized lighting;
·Cold light source, comfortable, low power consumption, belongs to green light source.
Install Caution：
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.