433MHZ CC1101 Wireless Module w/Antenna Wireless Transmission Transceiver Module
Popular
Product Introduction
Product features:
1. CC1101 RF chip, ultra-low power consumption of only 0.5uA
2. Long range, the measured distance is greater than 380 meters (depending on the environment with or without obstacles)
3. Standard SPI interface, mode 0, communication rate up to 10Mbps
4. High reception sensitivity -117dpm@250kbps
5. All industrial grade components, standard SMA antenna interface, support the development of low power consumption
1. CC1101 RF chip, ultra-low power consumption of only 0.5uA
2. Long range, the measured distance is greater than 380 meters (depending on the environment with or without obstacles)
3. Standard SPI interface, mode 0, communication rate up to 10Mbps
4. High reception sensitivity -117dpm@250kbps
5. All industrial grade components, standard SMA antenna interface, support the development of low power consumption
Product parameters:
Product name: CC1101 wireless module
RF chip: CC1101
Center frequency:433MHz
Center frequency: 10mW
Communication distance: 380m
Operating voltage: 1.9-3.6VDC, to meet the demand for battery power
Interface mode: 2*4*2.54 (available universal board Dupont wire)
Communication level: 07VDD-3.6VDC
Measured distance greater than: 380m (depending on the environment with or without obstacles)
Maximum power: 10dpm (about 10mw)
Air rate: 1.2kbps-500kbps (due to 433 physical characteristics, it is recommended not to exceed 20kbps)
Transmit current: 29.2mA (peak)
Receiving current: 14.7mA
Communication interface: standard SPI interface, mode 0, communication rate up to 10Mbps
Receive and transmit length: single packet 1-32 bytes, 3-stage FIFO buffer
RSSI support: support RSSI
Operating temperature: -30℃-+85℃
Operating humidity: 10%-90% relative humidity
Storage temperature: -40℃-125℃
Operating band: 387MHz-464MHz (adjustable by software, 433 recommended (plus or minus 10%)
Receiving sensitivity: -117dpm@250kbps
Module size:about 28mm*15mm
Length of glue stick:about 49.6mm
Pin number - Pin name - Pin direction - Pin usage:
GND - ground connection to power supply reference ground
VCC Power supply must be between 1.8 and 3.6V
GDD0 - Output - Module information output pin
CSN - Input - Module chip select pin for starting an SPI communication
SCK-Input - Module SPI bus clock
MOSI-Input-Module SPI data input pin
MISO/GD01-Output-Module SPI data output pin
GD02-Output-Module information output pin
GND - ground connection to power supply reference ground
VCC Power supply must be between 1.8 and 3.6V
GDD0 - Output - Module information output pin
CSN - Input - Module chip select pin for starting an SPI communication
SCK-Input - Module SPI bus clock
MOSI-Input-Module SPI data input pin
MISO/GD01-Output-Module SPI data output pin
GD02-Output-Module information output pin
Product List:
1X Module
1X Antenna
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
433MHZ CC1101 Wireless Module w/Antenna Wireless Transmission Transceiver Module
Product Introduction
Product features:
1. CC1101 RF chip, ultra-low power consumption of only 0.5uA
2. Long range, the measured distance is greater than 380 meters (depending on the environment with or without obstacles)
3. Standard SPI interface, mode 0, communication rate up to 10Mbps
4. High reception sensitivity -117dpm@250kbps
5. All industrial grade components, standard SMA antenna interface, support the development of low power consumption
1. CC1101 RF chip, ultra-low power consumption of only 0.5uA
2. Long range, the measured distance is greater than 380 meters (depending on the environment with or without obstacles)
3. Standard SPI interface, mode 0, communication rate up to 10Mbps
4. High reception sensitivity -117dpm@250kbps
5. All industrial grade components, standard SMA antenna interface, support the development of low power consumption
Product parameters:
Product name: CC1101 wireless module
RF chip: CC1101
Center frequency:433MHz
Center frequency: 10mW
Communication distance: 380m
Operating voltage: 1.9-3.6VDC, to meet the demand for battery power
Interface mode: 2*4*2.54 (available universal board Dupont wire)
Communication level: 07VDD-3.6VDC
Measured distance greater than: 380m (depending on the environment with or without obstacles)
Maximum power: 10dpm (about 10mw)
Air rate: 1.2kbps-500kbps (due to 433 physical characteristics, it is recommended not to exceed 20kbps)
Transmit current: 29.2mA (peak)
Receiving current: 14.7mA
Communication interface: standard SPI interface, mode 0, communication rate up to 10Mbps
Receive and transmit length: single packet 1-32 bytes, 3-stage FIFO buffer
RSSI support: support RSSI
Operating temperature: -30℃-+85℃
Operating humidity: 10%-90% relative humidity
Storage temperature: -40℃-125℃
Operating band: 387MHz-464MHz (adjustable by software, 433 recommended (plus or minus 10%)
Receiving sensitivity: -117dpm@250kbps
Module size:about 28mm*15mm
Length of glue stick:about 49.6mm
Pin number - Pin name - Pin direction - Pin usage:
GND - ground connection to power supply reference ground
VCC Power supply must be between 1.8 and 3.6V
GDD0 - Output - Module information output pin
CSN - Input - Module chip select pin for starting an SPI communication
SCK-Input - Module SPI bus clock
MOSI-Input-Module SPI data input pin
MISO/GD01-Output-Module SPI data output pin
GD02-Output-Module information output pin
GND - ground connection to power supply reference ground
VCC Power supply must be between 1.8 and 3.6V
GDD0 - Output - Module information output pin
CSN - Input - Module chip select pin for starting an SPI communication
SCK-Input - Module SPI bus clock
MOSI-Input-Module SPI data input pin
MISO/GD01-Output-Module SPI data output pin
GD02-Output-Module information output pin
Product List:
1X Module
1X Antenna
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.