This is a 0 degree bulkhead I designed to fit the Traxxas Drag Slash, I designed this because I was having difficulty finding availability from other manufactures. This bulkhead provides direct upward movement of the suspension without the rearward movement of the stock 30 degree part. I have also included an adjustable shock mount to provide more adjustment that the stock mount. You may need to adjust your shocks with spacers or end stops based on the ride height you chose. This also includes 2 M3x14mm screws to attach the shock mount to the bulkhead as well as 2 M3x25mm screws with spacers and nuts for the top mounting of your shocks as seen in the photos. This is a 3D printed part printed out of PA12-CF an extremely durable material and printed on an industrial grade printer. All photos are of my personal cars that I race weekly. Please feel free to ask any questions and as always check seller feedback where you will see I am rated 100% since I joined Ebay in 2005. Good luck at the races!