DSI Overdenture Lock Attachements are designed for use with overdentures or partial dentures retained in whole or in part by dental fixtures in the mandible or maxilla.
Low-Lock attachment featuring the lowest vertical profile. This new compact design with an int thread will ensure multiple solutions for the most complex treatment plans including those which demonstrate divergent fixtures. The low-lock innovative design offers the best aesthetic results.
Low-Lock is the smallest attachment available on the market even with its reduced height and width it maintains equal retention values of the most popular ball and cap attachment systems.
The high degree of elastic quality designed into each DSI's retentive female cap allows for a greater contact zone interface between the cap lining and male component. Each cap assures superior stability and long-term functionality. Low-Lock retention caps are available in a variety of color-coded retention levels.
The Low-Lock profile gives optimum insertion and controlled distribution of the masticatory forces on tissue preventing overstress on the fixture adapter heads, in both cases parallelism between the fixtures or in cases where the divergence may reach 30 degrees.
Due to the tolerance of the Low-Lock design, together with the elasticity of the retentive cap in excess of these divergence degrees, the optimal solution is the castable Low-Lock when U is connected to the UCL and the fixture system allows the technician to correct any kind of divergence achieving the desired direction.
Providing the aesthetic result and passive insertion of the prosthesis, the int thread allows the Low-Lock adapter head to be connected passively for the construction of caste or milled bar. Due to the elastic Seger system, the passive insertion of the bar is possible even in cases of extreme divergence between fixtures. Simplifying the technique traditionally used, you are compensating for any small imperfections arising during the clinical or laboratory procedures.
DSI offers purchase of the kit which includes:
Adapter Head, metal housing, protective disc and 4 retention caps
with different retention forces.
DSI Lock Straight Adapter Head Set Includes:
DSI Low Lock Attachment are made of high-quality titanium alloy and designed with the highest level of precision.
Advantages:
- Ideal for all overdenture patients
- Makes inserting simple
- Suitable for cases with angulation problems
4 Caps Set
High-quality silicone caps made by DSI.
Those silicone caps, isolate ring and titanium housing fit the most popular brands' attachments like MIS, Zimmer, A.B, Adin and more...
- Yellow extra soft retention 0.6kg/ 1.5lbs
- Pink Soft retention 1.2kg/ 3.0lbs
- White standard retention 1.8kg/ 4.5lbs
- Violet strong retention 2.5kg/ 8.0lbs
Protective Disc
Is to be placed underneath the housing for supporting/isolating the Lock Adapter Head while adding height.
Titanium Housing
Height 2.0mm
High-quality titanium alloy grade 23, made by DSI
Made on top CNC machines, in a new and completely different level of quality and precision.
LOT IS FOR 1 STRAIGHT LOCK SET, THAT CONTAINS
1 LOC-IN ATTACHMENT OF SELECTED HEIGHT (0.5-6mm)
4 SILICONE CAPS - DIFFERENT RETENTION
1 SILICONE RING
1 TITANIUM HOUSING CAP
DSI Overdenture Lock Attachements are designed for use with overdentures or partial dentures retained in whole or in part by dental fixtures in the mandible or maxilla.
Low-Lock attachment featuring the lowest vertical profile. This new compact design with an int thread will ensure multiple solutions for the most complex treatment plans including those which demonstrate divergent fixtures. The low-lock innovative design offers the best aesthetic results.
Low-Lock is the smallest attachment available on the market even with its reduced height and width it maintains equal retention values of the most popular ball and cap attachment systems.
The high degree of elastic quality designed into each DSI's retentive female cap allows for a greater contact zone interface between the cap lining and male component. Each cap assures superior stability and long-term functionality. Low-Lock retention caps are available in a variety of color-coded retention levels.
The Low-Lock profile gives optimum insertion and controlled distribution of the masticatory forces on tissue preventing overstress on the fixture adapter heads, in both cases parallelism between the fixtures or in cases where the divergence may reach 30 degrees.
Due to the tolerance of the Low-Lock design, together with the elasticity of the retentive cap in excess of these divergence degrees, the optimal solution is the castable Low-Lock when U is connected to the UCL and the fixture system allows the technician to correct any kind of divergence achieving the desired direction.
Providing the aesthetic result and passive insertion of the prosthesis, the int thread allows the Low-Lock adapter head to be connected passively for the construction of caste or milled bar. Due to the elastic Seger system, the passive insertion of the bar is possible even in cases of extreme divergence between fixtures. Simplifying the technique traditionally used, you are compensating for any small imperfections arising during the clinical or laboratory procedures.
DSI offers purchase of the kit which includes:
Adapter Head, metal housing, protective disc and 4 retention caps
with different retention forces.
DSI Lock Straight Adapter Head Set Includes:
DSI Low Lock Attachment are made of high-quality titanium alloy and designed with the highest level of precision.
Advantages:
- Ideal for all overdenture patients
- Makes inserting simple
- Suitable for cases with angulation problems
4 Caps Set
High-quality silicone caps made by DSI.
Those silicone caps, isolate ring and titanium housing fit the most popular brands' attachments like MIS, Zimmer, A.B, Adin and more...
- Yellow extra soft retention 0.6kg/ 1.5lbs
- Pink Soft retention 1.2kg/ 3.0lbs
- White standard retention 1.8kg/ 4.5lbs
- Violet strong retention 2.5kg/ 8.0lbs
Protective Disc
Is to be placed underneath the housing for supporting/isolating the Lock Adapter Head while adding height.
Titanium Housing
Height 2.0mm
High-quality titanium alloy grade 23, made by DSI
Made on top CNC machines, in a new and completely different level of quality and precision.
LOT IS FOR 1 STRAIGHT LOCK SET, THAT CONTAINS
1 LOC-IN ATTACHMENT OF SELECTED HEIGHT (0.5-6mm)
4 SILICONE CAPS - DIFFERENT RETENTION
1 SILICONE RING
1 TITANIUM HOUSING CAP
FEATURED PRODUCTS
Please Note:
1. In case the listing has some different options to choose from (size/type/length etc), your choice needs to be provided while ordering using "note to the seller" option. After payment is made, the order is being processed and prepared for shipping within 24h, you can still message us and ask to make a changes, however, we try to ship orders as fast as it's possible to minimize the overall waiting time, so in case no message was received during the preparation, we will ship your order using the most popular sizes and configurations.
2. Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check your country's customs office to determine what these additional costs will be prior to bidding/buying.
We believe that service speed is very important. In most cases, the item will be dispatched within one business day after payment received.
Please note, that in Israel, working days are from Sunday to Thursday, Friday and Saturday are considered as holidays.
Default mail service that we use for the shipment is Israel Post: Regular / Priority Mail. Low-value orders (under 50usd order total) are sent by regular airmail - it has the same speed as a registered post, but passes customs more smoothly and doesn't request an authorized person signature request upon arrival.
The only drawback of it is a lack of tracking option. But our customers are protected by "no matter what" guarantee: if items are not arriving in the suggested timeframe, you receive a full refund.
Average shipping time is 2-4 weeks, for your country specific delivery time based on a previous experience, feel free to ask us.
Express Shipping upgrade is possible in most cases. The EMS service provides 2-5 business days parcel arrival with guaranteed door-2-door delivery and immediate tracking option. The price addition depends on the order volume and destination country, starting with as low as 29usd. Please contact us for more info and a shipping price offer.
Being medical devices seller is a great responsibility. That's why every item in your order is checked prior sending.
If, due to unexpected circumstances, you received a damaged or defective item, please contact us immediately, using message system, or contact numbers provided in the leaflet inside a parcel. Full and immediate refund/exchange is guaranteed. Same in case there's a mistake or missing items in the order.
We strive to exceed all your expectations and believe you will be satisfied with your purchase. You can return your bought item for up to 14 days from the date of delivery. In case the item is returned for any other reason besides mentioned above, you are responsible for the return shipping charges. The item needs to be returned in its original packaging and in unused condition.
No refund will be issued if the product shows signs of use or there are missing parts.
Thanks for understanding.
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Contact info: Royal Dent Roman Nodelman 67 Tel-Khai av. Ashdod, Israel
