Thank you for looking.
Specification:
- Operating Voltage:3.5V~8.4V
- Dimension:23.6×18.4×28.4mm
- PWM Mode:Normal/ SHR/ SSR
Compatibility:
Compatible with SANWA FH3/FH4T remote control system.
Suitable for remote control M12, M11X, EXZES X, MT-4, GEMINI X, MT-S, MT-4S, M12S, M17.
Feature
- Bidirectional communication system, monitor the receiver voltage by transmitter in real time
- Compatible stabilizing voltage, operating voltage can up to 1-2s lipo, sudden low voltage protected
- High sensitivity built-in antenna, full 4CH output + BAT port suitable for all kinds of remote control cars, simulation rock crawlers.
- L-shape design, small size to save more space for rc car.
Bind Procedure
- Turn on the transmitter, get to the SYSTEM menu and select BIND
- Pressing the "SET" button of receiver and power on, the LED on the receiver will flash slowly. Press and hold the “SET” button for 2 seconds then release, the LED on the receiver will keep flashing slowly.
- Select BIND menu in the transmitter and press ENTER while the LED on the receiver is flashing slowly. The LED will be off immediately.
- Press ENTER again on the transmitter, the LED will be solid, indicating binding process is successful
- Please repeat the above procedure if binding is failed.