Introduction of Tensioner:
The tensioner is the key component of the winding machine to generate

adjustable tension when winding, so that the enameled wire has an appropriate

tension when winding, so that the wound coil is tight and tight, ensuring the consistency

of the coil technical indicators Sex. When you produce products based on enameled wire,

you will definitely encounter wire breakage, loose wire and other defects, as well as other

problems caused by them. The magnetic tensioner produced

by our company will solve these problems for you.

The characteristics of magnetic damping tensioner are:
A. Magnetic damping tensioner, also known as permanent magnet tension

controller, is a device that transmits constant torque as a medium.

The damping disc does not contact the magnet, and there is no sliding friction,

so it has a long service life and extremely stable tension control.
B. The rotating parts are all precision-processed with light and strong materials,

and the moment of inertia is extremely small.
C. The tension output rubber wheel is made of elastic soft rubber,

which does not hurt the thread.
D. The metal parts have been treated with rust prevention and have

excellent corrosion resistance.
E. The installation structure is simple, the tension is easy to adjust,

the structure design is compact, the volume is small, and it can work stably in various positions.

Tension adjustment method and matters needing attention
1. It is recommended to adjust the scale value to 3 or higher for use.

If the tension is too large at this time, it is best to choose a damper of one size smaller.
2. If it is used below the scale value 3, force pulsation may occur.

Please eliminate the pulsation as described in the next item 3.
3. Loosen the fastening screw, turn the scale to 10, slowly turn the scale

to 0 while rotating the main shaft, and then turn to the desired scale value. Tighten the locking screw.
4. If tension pulsation occurs during use, please repeat the steps

of adjustment method 3 above until you get a satisfactory tension.

5. The damper uses a magnet to generate a medium magnetic field,

and the material is brittle, so please do not disassemble it during use to avoid damage to the parts.