Popular
Product Introduction
Features:
1.Chip model: TMC2240
2.Compared to the TMC2209 driver, the current is higher and the heat dissipation is better
3.In the case of high-speed printing (with the same current), compared to other TMC drives, the motor torque controlled by TMC2240 is greater and more powerful
4.This is an intelligent silent stepper motor drive module
5.The product is made of high-quality materials, with stable performance and long service life
Product Introduction:
TMC2240 is an intelligent silent stepper driver that defaults to SPI mode and supports a maximum effective current of 2.1A, peak current of 3A, and 4.5-36V DC power input.
It supports the infinite zero return function. In the high-speed mode, the current change amplitude is very small to maintain sufficient torque, and the Counter-electromotive force braking protection circuit is integrated, which can be used in Klipper firmware.
Parameters:
Input voltage: DC4.5-36V (recommended: DC12-24V)
Output current: Maximum effective current: 2.1A, maximum peak current 3A
Drive mode: SPI mode
Wiring method: plug-in drive
Logic voltage: 3.3V-5V
Unlimited bit function: support
Counter-electromotive force protection: Counter-electromotive force braking protection of resistance+MOS tube mode
Supported firmware: Klipper, Marlin
Adaptor board: Equipped with TMC SPI interface motherboard. For example: MKS SKIPR, Monster8, Nano V3, Gen_ LV2. x
Other functions such as driving current, subdivision, and infinite bit are configured through software
Package include:
1 x Module
1 x Accessory
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Product Introduction
Features:
1.Chip model: TMC2240
2.Compared to the TMC2209 driver, the current is higher and the heat dissipation is better
3.In the case of high-speed printing (with the same current), compared to other TMC drives, the motor torque controlled by TMC2240 is greater and more powerful
4.This is an intelligent silent stepper motor drive module
5.The product is made of high-quality materials, with stable performance and long service life
Product Introduction:
TMC2240 is an intelligent silent stepper driver that defaults to SPI mode and supports a maximum effective current of 2.1A, peak current of 3A, and 4.5-36V DC power input.
It supports the infinite zero return function. In the high-speed mode, the current change amplitude is very small to maintain sufficient torque, and the Counter-electromotive force braking protection circuit is integrated, which can be used in Klipper firmware.
Parameters:
Input voltage: DC4.5-36V (recommended: DC12-24V)
Output current: Maximum effective current: 2.1A, maximum peak current 3A
Drive mode: SPI mode
Wiring method: plug-in drive
Logic voltage: 3.3V-5V
Unlimited bit function: support
Counter-electromotive force protection: Counter-electromotive force braking protection of resistance+MOS tube mode
Supported firmware: Klipper, Marlin
Adaptor board: Equipped with TMC SPI interface motherboard. For example: MKS SKIPR, Monster8, Nano V3, Gen_ LV2. x
Other functions such as driving current, subdivision, and infinite bit are configured through software
Package include:
1 x Module
1 x Accessory
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.