Features:

  1. Helps to circulate oxyled and water in your bird baths, aquariums and/or ponds and fountains.
  2. Fully powered by the sun, this fountain pump runs automatically, is eco-friendly and efficient.
  3. It is equipped with 4 nozzle spray design and also makes a great decoration!
  4. Simply place the solar panel in sunlight to auto start
  5. Water spray height: 30 -50cm, connect the different nozzle, the height of the water will be different.
  6. When the solar panel receives sufficient sunlight, the pump will start in 3 seconds


Description:
13cm Fountain :

  • Solar panel: 7V/ 1W single crystal silicon
  • Diameter: 13cm
  • Maximum quantity of flow: 200L / h
  • Working current: 150MA
  • Maximum Lift: 100cm
  • Maximum Spraying Height: 35-65cm.（Connecting different nozzles will result in different heights of water spraying.）
  • Pump life:> 20000 hours
  • Pump noise: <45DB
  • Material: ABS, PE


16cm Fountain :

  • Solar panel: 7V/ 1.5W
  • Diameter: 16cm
  • Maximum pump flow: 160L/h
  • Working current: 150MA
  • Maximum Lift: 100cm
  • Maximum Spraying Height: 35-65cm.（Connecting different nozzles will result in different heights of water spraying.）
  • Pump life:> 20000 hours
  • Pump noise: <45DB
  • Material: ABS, PE


Package includes:

  • 1*Solar fountain 
  • 6*nozzle 
  • 1*Connecting pipe 
  • 4*Anti-collision bar 
  • 1*Instruction

How To Use

  1. Putthe pump totally in the water with its nozzle over the water;
  2. Be sure the pump is fixed firmly on the bottom of the fountain to avoid vibration;
  3. Put the solar panel under enough sunlight and it is better to face directly to sun.
  4. When the solar panel receives sufficient sunlight, the water pump will start within 3 seconds.


Precautions

  1. This product is a solar powered direct drive water pump without an additional battery. The height of the water spray completely depends on the strength of the sunlight. When the sunlight is weak, the water pump will not work continuously, but will automatically start repeatedly until the sunlight reaches a certain intensity and the water pump returns to continuous operation. When using, please place the product in unobstructed sunlight, as shading can affect the normal operation of the water pump.
  2. The water pump must be completely immersed in water and cannot be dehydrated for a long time. When the water pump is just immersed in water, due to the presence of air inside the pump, it is recommended to wait for the water pump to spray normally before inserting the nozzle.
  3. Please keep the water source clean and regularly clean the water pump to prevent foreign objects from being sucked in by the water pump and causing it to malfunction